Jeep Enthusiast Forums banner

Steering column issues

391 views 2 replies 2 participants last post by  juanWJ 
#1 ·
Alright, I just finished up swapping out my heater core and got everything back together. The good news is I only have one bolt and a couple of trim screws that didn't find their way home.

However the bad news is that I now have a considerable amount of up and down play in my steering column. It appears the movement is coming from the area where the column passes through the firewall. I have also noticed that I can see daylight in that area as well.

Any ideas?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top