Jeep Enthusiast Forums banner

What did you do to your WJ today?

Tags
wj
5M views 53K replies 3K participants last post by  X-Hibition 
#1 ·
Tell us what you did!

Show pics!

I washed mine and Im still waiting for my lift to show up!

I put my new WHEELS and tires on with the jack :)

And replaced driver side axle shaft and changed all diff fluids.
 
See less See more
1
#21,562 ·
RIPNBST said:
I recently had my trans serviced and they used BG fluid instead of the Mopar stuff. My trans seems to be acting up. Is it critical that the Mopar fluid be used?
They say it is seams mopar has fluids for every thing they have Certain fluids further transfer cases and differentials So i would imagine the transmission fluid has to be Mopar as well
 
#21,564 · (Edited)
Done the other day, Painted grill with rustoleum gloss black, also got tired of all the red on the tail lights, just hit it with the same paint to test it out, When the tail lights start to peel I will buy some paint for plastics :)

http://s1278.photobucket.com/user/k...130527_133418_zps4099f4d3.jpg.html?sort=3&o=2

http://s1278.photobucket.com/user/k...130530_094147_zps015e5436.jpg.html?sort=3&o=0

http://s1278.photobucket.com/user/k...130527_190503_zps0294e5e1.jpg.html?sort=3&o=1

Doing an interior fishing rod holder setup right now, will post pics later when done.

Got it in. needs a little more work, but it will be fine for now. :)

http://s1278.photobucket.com/user/k...130530_165122_zps2453898c.jpg.html?sort=3&o=0

http://s1278.photobucket.com/user/k...130530_165056_zps6b65345d.jpg.html?sort=3&o=1

http://s1278.photobucket.com/user/k...130530_165047_zpsdc147d39.jpg.html?sort=3&o=2
 
#21,568 ·
Kinda diggin' the Super Bull Bar, and at $105, that's cheap.
For sure! And apparently it works with the Fawkes relocation brackets? I was going to just get the standalone Fawkes Fab shackle mounts because it seems bull bars were a little too expensive and the standalone shackle mounts are probably a good bit stronger. But I imagine the modular system with bull bar relocation and shackle mounts is strong enough and if I can get a bull bar for $100 on top, I might go that route.
 
#21,570 ·
For sure! And apparently it works with the Fawkes relocation brackets? I was going to just get the standalone Fawkes Fab shackle mounts because it seems bull bars were a little too expensive and the standalone shackle mounts are probably a good bit stronger. But I imagine the modular system with bull bar relocation and shackle mounts is strong enough and if I can get a bull bar for $100 on top, I might go that route.
Timbo is selling a set of the brackets, bull bar relocation and shackle mounts for 150 shipped.
 
#21,575 ·
I had some bookmarked, they were used by quite a few guys on here a couple of years ago. I can't find the bookmark now.
Well let me know if you find it or think of any info on them.. Gotta get these cause a wheel is out of balance but cant be taken off easily until i have new lugs to replace these old crappy two piece ones. Thanks!
 
#21,576 ·
NorthernWJ said:
Took the rear bumper off and loosend all the tank cover/hitch bolts make sure theyre not seized. Why? Picking up my tank skid this weekend!
I'm hoping to get mine ASAP this weekend as well!! Still need a bezel and wiring tho, don't plan on any towing but I still would like to have it together.

Plan on putting a hitch mounted dirt bike carrier on it.
 
Top