I searched but couldn't find a thread on 2/2.5" lift pictures. I realize you could look through the "Post Your WJ Pics" sticky, but for people looking for lift specific pictures, this could be a start.
So let's see them! Please state lift information with your post.
When I was looking for pics of 3" lifts I did a google search for "wj 3" lift pics" and I found a crap load of pics. You can click on the pics and they'll usually have some of the lift components info or link you to the site where it's hosted. Just an option for ya if you haven't already done that.
Sure, just thought you were looking for your own need like right away, lol. I'm not really patient when looking for pics of a mod I want to do and it's really addicting. :cheers2:
I want a daily driver with as much clearance as possible, but with a spare in the trunk-well.
If max wheelwell size in a 17" rim is *245/70/17, what is max tire size for 16" rims? Thanks.
2.5/2" fat bobs coil springs, 3/4" front spacer, 245/75/16 treadwright warden a/t's (30.7" diameter 9.8" width)..this size just did squeeze into my wheel well, the cover sticks up about 1 inch or so
I want a daily driver with as much clearance as possible, but with a spare in the trunk-well.
If max wheelwell size in a 17" rim is *245/70/17, what is max tire size for 16" rims? Thanks.
I had 255/70/16's with the cover slightly ajar and my current 245/75/16's fit flush provided I make sure none of the other ropes, straps, whateverr other junk I store in there is not under the tire when I put it back in there. I think side lugs also come into play with regards to what you can fit in as well. The bigger they are, the smaller the tire you can fit.
I had 255/70/16's with the cover slightly ajar and my current 245/75/16's fit flush provided I make sure none of the other ropes, straps, whateverr other junk I store in there is not under the tire when I put it back in there. I think side lugs also come into play with regards to what you can fit in as well. The bigger they are, the smaller the tire you can fit.
I have not measure it out yet, but at stock height I have about an inch maybe two of clearance left...
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Enthusiast Forums
18.5M posts
726.7K members
Since 2000
A forum community dedicated to all jeep owners and enthusiasts. Come join the discussion about performance, engine swaps, modifications, classifieds, troubleshooting, maintenance, and more!