Jeep Enthusiast Forums banner

New guy here! got some steering issues plz help

2K views 45 replies 8 participants last post by  metalhead1 
#1 ·
hey guys! im new here. Ijust bought a 90 jeep wrangler,first off let me give some background on the jeep. 4 inch pro comp lift,shackle flip, shackle lift and 3 inch body lift (gotta go)and 35-14.50 super swamer boggers. i just got it yesterday and took it down the road to go to where i usually 4 wheel and as soon as i hit second gear it wanted to walk all over the road to the point that i felt it was dangerous to drive i can control it somewhat but it will dart different directions at random it seems to get worse when braking.the steering itself is a little loose but i dont think its the entire problem any help would be greatly appreciated and keep in mind im new to jeep suspension so plz no bashing
thanks!
 
#12 ·
The over the top steering is the best way to get to where you need to be. Teraflex has a knuckle piece that works the same way. It is a necessary piece to safe steering. Your drag link isn't even straight anymore because of the horrible angles of the steering assembly. You have a huge lift and need to compensate with some $$$



 
#15 ·
Losing lift is done by either getting smaller springs or springing it under the axles. It's going to be easier for you to correct the steering to make it safe but you can fit those tires under the jeep with those springs under the axle. Is the height and flex working for you? You are actually looking at a dilemma that could be a lot of money going into your jeep based on your needs for the jeep. Honestly, as a wheeler and seldom driven on the road, I would correct the steering and get some different looking shackles up front. It's gonna cost some money but it's the only way to make it safe. Can you take a pic of the rear axle with suspension as well?



 
#19 ·
I'd listen to what Anticanman is saying. I was blown away when I saw the pics of your steering. I have the Teraflex knuckle he is referring to but I use it in a sprung under setup. You Definitely need a cross over steering kit of some sort. I would consider some boomerang shackles for the front and back. It will make it look a hell of a lot better and steer as well.
 
#26 ·
I would agree he needs a SYE but I think the reason he is snapping u joints would be because of not having a anti wrap bar.
A picture of the rear diff from the back would help us figure out what axle you have in the rear.
 
#27 ·
I ran the Tera Flex knuckle SOA with a lunch box locker.
I lost alot of steering radius with that knuckle, I would not recomend it. It is better than what you are running now though.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top