Woo hoo! I'm back in the driver's seat of an XJ! I had an old build thread for my old 00 xj but sadly the day came that I had to give it up. Ever since I got rid of it, I regretted every single day of it and vowed to get another XJ someday.
Just picked up a 98 DD from Craigslist. I have some cosmetic and mechanical issues to take care of before the mods start. This will be my work rig so I'll be keeping everything practical.
(In no specific order)
-Remove ugly chrome tint
-Passenger front window regulator
-Replace tie rod ends
-Fix "hard to start" issue (fuel pressure drops to 0 immediately after shutting off)
-Find replacement wheels ASAP! I absolutely HATE the gold wheels.
-Flip tires so white lettering isn't visible
-Get new passenger fender and front clip
Plans are to BB it about 3" like my last XJ. Who knows what else I'll get into with it.
Looking forward to being back on the forums :cheers2:
Awesome. I cant wait to build my xj as well. When I wheeled it a couple yrs back that thing was almost unstoppable in mud which is all we have around here. The only thing it had was some walmart gy a/ts. It literally put the fullsize trucks on M/ts to shame:rofl:. Imagine if it was lifted with more aggressive meats:drool:. Im looking forward to your build. I may get some ideas off the thread. Since bringing my xj back to road duty and parking my yj I'll be lurking on the XJ section more ofteneaking:
congrats and good luck. If you decided to lift 3'' make sure you get a new leaf vs aal becuase within a couple of months it will sag and if you carry a fullsize spare and various tools with a toolbox itll sag bad and have a hell of a rake!! Ask me how i know! :laugh:
haha, yea I could see those aal setups being saggy. I'm going to do it like my last build, bastard pack in the rear, gc coils and 2" spacers in the front.
Finally got a couple of days off of work. Going to head to the junkyard in the morning to try and score some s10 or dakota leaf packs. Also going to look for some thunderbird or gc coils. Not expecting much luck since the junkyards around here are crap. I'll be installing my inline check valve to fix my hard-to-start issue and also going to possibly trim fenders, not for the purpose of tire rubbing, I have a flare missing and don't like them anyway, off they go.
Didn't get very lucky at the junkyard but did find these bad boys in an old 94
Figured I would paint them black so I got the materials and got started.
Sprayed them down with Eagle One All Wheel and Tire Cleaner (the best stuff I've used so far) and scrubbed them real good then sprayed them off with water.
After they dried I put a wire cup brush on a drill and scuffed them up a bit.
Followed that up with some 320grit sandpaper and cleaned them again.
Here they are scuffed and ready to paint
I used Duplicolor High Performance Wheel Coating. It really seemed to do the trick.
Finished product after 3 coats black and 3 coats clear.
Got a lot accomplished today. Got my new painted wheels mounted, installed my roof rack, removed the rear fender flares and did a cut and fold on the rear fenders. I'm at the mall with my wife at the moment so ill post all the pictures I took today when I get home and on an actual computer.
Cut and fold on the rear quarters. Took a sharpie and circled the pinch welds so I didn't cut through them.
Cut the rear bumper cap. Just did a rough cut for now. I'll trim or rip it off later.
Folded them all in with a rubber mallet
Taped off where I wanted the undercoating to do go.
Here's the finished product
Wheels and roof rack on
My fender trimming and undercoating didn't turn out as clean as I had hoped but it looks decent to me so I'll touch it up again soon. It really didn't have to be perfect so I'll live with it.
Turned out to be a productive couple of days off. Back to work until thursday.
Thanks guys. On the rear fenders I thought maybe I could sand it back down and put some body filler in those cuts. I'm not very worried about it but I thought I could eventually clean it up a bit. I'll be doing the front fenders on my next day off.
Still need to fix my oil leak and hard to start issue.
I feel ya, we bought our house not too long ago, me n the wife are going bat**** crazy we've been so busy. I havent even got started on my 98 build yet either.
For all of us to live in KY we are still a good ways away from one another. Ive been to Somerset a bunch though, and is Maysville near Ohio line? If so Ive been there before too.
Hopefully we can all get our **** together this year n do something.
Agreed. The place I'm looking to get is 10 acres with a 1/3acre pond. Half woods and half hay field with a larg barn. The house only about a 1000sq ft and needs allot of attention but nothing I can't do. the girl I was seeing that had a son I thought I was going to adopt decided she was still in love his dad, her ex so she split. That hurt! But life goes on, so it's just me. So I can fix it up as I live in it with no problem. Super excited! I'll send pics if I get the place. I've got the banks backing, just have to make the deal and paperwork. But your right we are a pretty scattered bunch. And there are allot of lifted XJ's around here. I tell all I talk to, to get on the forum but I don't know.
Cut the front fender and undercoated rocker panels and such. Haven't done the other side yet. Ran outta time. I'll take more pictures when I do the other side to show you all how I did it.
Now....whos got a new front bumper they'd like to give away? :rofl:
Cut the front fender and undercoated rocker panels and such. Haven't done the other side yet. Ran outta time. I'll take more pictures when I do the other side to show you all how I did it.
Now....whos got a new front bumper they'd like to give away? :rofl:
there's an older XJ just down the street from me in front of an old weld shop that has a pretty nice aftermarket bumper that has been sitting for years. Every time I stop to ask someone about it, there's nobody there. :thumbdown: I bet I could get it for cheap if I could only get a hold of him, lol
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Enthusiast Forums
18.5M posts
726.8K members
Since 2000
A forum community dedicated to all jeep owners and enthusiasts. Come join the discussion about performance, engine swaps, modifications, classifieds, troubleshooting, maintenance, and more!