Jeep Enthusiast Forums banner

So after months of trying to find a short in y brake light wiring, I finally fixed it

382 views 2 replies 2 participants last post by  AnonymousD 
#1 ·
Turned out to be a faulty plug on the steering column.

Faulty as in it wasnt plugged in all the way. Now all my turn signals and the brake lights work again. Yay.

I cant figure out how I missed it. I think I thought it was the plug for the windshield wipers, cause they are about the same size.

Well atleast its fixed now.
 
#3 ·
I can take a pic tomorrow. But its a long black plug right under the steering column. I think they are supposed to be mounted to the bottom, but mine was kinda hanging.

And now when I press the brake, the side marker on the passenger front and the left turn signal light on the dash come on. And the front passenger light is always bright.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top