I am new to the forum and I have to say this is one of the best sources of information that I have found.
So I picked up my 98 Sahara a couple of months ago and it is time to let the mods begin. I have been reading the forum here for several weeks now and I am pretty sure where I want to go, and how to get there, but I do have some questions that I can't seem to find answers to.
First, here is where I am:
- 2" spring spacers
- 1" body lift (?)
- sway bar disconnects
- 31 x 10.50
And where I am going (for now):
- 4" RC Series II (possibly X Series depending on $$)
- shocks
- SYE & CV shaft
- new disconnects
- adjustable track bar
- 33 x 12.50
My questions are:
When looking at the front sway bay I have noticed that the disconnect on the passenger side is almost touching the frame and on the other side there is about a 1" gap. It also looks the tires are off as well. Could this be due to the track bar being off due to the 2" spacers?
As I am under there this weekend checking thinks out what should I be looking for as far as what could be worn out, or needing to be replaced. I would like to do everything that I can while I have a shop for the lift kit install.
Thanks in advance for any and all suggestions.
Dolan
So I picked up my 98 Sahara a couple of months ago and it is time to let the mods begin. I have been reading the forum here for several weeks now and I am pretty sure where I want to go, and how to get there, but I do have some questions that I can't seem to find answers to.
First, here is where I am:
- 2" spring spacers
- 1" body lift (?)
- sway bar disconnects
- 31 x 10.50
And where I am going (for now):
- 4" RC Series II (possibly X Series depending on $$)
- shocks
- SYE & CV shaft
- new disconnects
- adjustable track bar
- 33 x 12.50
My questions are:
When looking at the front sway bay I have noticed that the disconnect on the passenger side is almost touching the frame and on the other side there is about a 1" gap. It also looks the tires are off as well. Could this be due to the track bar being off due to the 2" spacers?
As I am under there this weekend checking thinks out what should I be looking for as far as what could be worn out, or needing to be replaced. I would like to do everything that I can while I have a shop for the lift kit install.
Thanks in advance for any and all suggestions.
Dolan