I have a t-18 I bought on ebay. It is a nice peice but I can not figure out what it is for the life of me. There are so many variations. The top cover has 13-01-097-907 and the side by pto port has 13-01-065-906 it apears to have about 7 an 3/8 of stick out on input shaft. The spot where pilot would ride is roughly 11/16 it has the jeep bolt pattern where you have to use the stud on a t150 bell housing. I am trying to find a clutch and pilot bearing that will work with this. Any help would be greatly apreciated. Part numbers would also be a big help. This is my first jeep build and I did it ground up this site has been awsome for help.
I had planned to use the t-150 bell housing I have. Do they make a spacer so I can use that. The in-put shaft is close to 1 1/16 just slightly less than that. The novak site is great but the specs from this trans I do not see on there. These t-18's are great but they sure are hard to identify. Thanks for the help please keep it coming.
I must be measuring input size wrong. I am measuring the splined part and that is 1 1/16 but my t-14 measures the same and that is suppose to be 1 1/8 so should I be measuring under the bearing retainer.
Its like the black one in pic has the flat side not the bulge on bottom for reverse. Its definatly 1 1/16 but the disc has a little more slop than i would like and the input shaft is not worn, Im at a loss here. Really getting frustrated. I do belive the t150 bell will work but I need to get disc problem figured out. Any ideas? I told myself I was going to get this figured out today it was my only goal for the day.
Thanks for the help I will get a disc and try that.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Enthusiast Forums
18.5M posts
726.8K members
Since 2000
A forum community dedicated to all jeep owners and enthusiasts. Come join the discussion about performance, engine swaps, modifications, classifieds, troubleshooting, maintenance, and more!