Jeep Enthusiast Forums banner

THOR4x4 Quarter Guards

6K views 5 replies 4 participants last post by  Scottmc01 
#1 ·
After the little mishap in Moab on Metal Masher when my brothers rig slide into the rock and smashed his tail light a cracked his fender flare he want to purchase some steel boxed tail lights like I was running. We searched and could only find one company that carried them. While looking for a desent quarter guard for my tube fender build I came accross THOR4x4 quarter guards with built in tail lights. I was doing some searching when I came across a picture of their old style with three round tail lights instead of the one oval and one round. I ended up showing them to Tim and he like the older style and thought this would be a great to install on his jeep rather than just the tail lights. After some asking around I got the number of the owner of THOR4x4 and gave him a call asking if he could have two sets of the old style made for me. There was no problems and soon they were at my door. The quality of the quarter guards was some of the highest I have seen. I will recommend THOR4x4 quarter guards to anyone in the market for quarter guards or tail lights. On Terry's suggestion I went down to the Lighthouse in Commerce City to find LED lights for the taillights. If you are looking for anytype of truck or safety light they can get them. We decided we wanted ours to be different so we purchased lights that are clear when off but have red LED's when the park, brake, or turn signal lights are on. Here are some pictures of last nights install:






If you notice there is a backing plate to seal off the openings where the wires would go on a stock tail light.



 
See less See more
9
#3 ·
Cruzin Illusion said:
After the little mishap in Moab on Metal Masher when my brothers rig slide into the rock and smashed his tail light a cracked his fender flare he want to purchase some steel boxed tail lights like I was running. We searched and could only find one company that carried them. While looking for a desent quarter guard for my tube fender build I came accross THOR4x4 quarter guards with built in tail lights. I was doing some searching when I came across a picture of their old style with three round tail lights instead of the one oval and one round. I ended up showing them to Tim and he like the older style and thought this would be a great to install on his jeep rather than just the tail lights. After some asking around I got the number of the owner of THOR4x4 and gave him a call asking if he could have two sets of the old style made for me. There was no problems and soon they were at my door. The quality of the quarter guards was some of the highest I have seen. I will recommend THOR4x4 quarter guards to anyone in the market for quarter guards or tail lights. On Terry's suggestion I went down to the Lighthouse in Commerce City to find LED lights for the taillights. If you are looking for anytype of truck or safety light they can get them. We decided we wanted ours to be different so we purchased lights that are clear when off but have red LED's when the park, brake, or turn signal lights are on. Here are some pictures of last nights install:






If you notice there is a backing plate to seal off the openings where the wires would go on a stock tail light.



click free
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top