Ok so i was walking through the local tractor supply and i got to browsing the hardware section and i came up with a cheap diy idea.
Ok so the basic idea is a place to rest your foot while driving. I know that foot pegs have been around for a long time and there are mixed opinions on them but this is a cheap way of doing them.
What you will need is
3/8" i bolt (x2)
3/8" nut (x2)
1/2" x 5" bolt (x2)
1/2" washer (x2)
1/2" nut (x2)
My total cost was about $8
First take the 1/2" bolt and put it through the loop in the 3/8" i bolt
Then slide the 1/2" washer onto the bolt and tighten the nut down onto it tight.
Now just slide them into your door hinge and use the 3/8" nut to tighten them down so they dont move around and your done
There you go $8 foot pegs.
Im not responsible for anything that may go wrong in anyway and be aware of the risk involved when using foot pegs on your jeep
Ok so the basic idea is a place to rest your foot while driving. I know that foot pegs have been around for a long time and there are mixed opinions on them but this is a cheap way of doing them.
What you will need is
3/8" i bolt (x2)
3/8" nut (x2)
1/2" x 5" bolt (x2)
1/2" washer (x2)
1/2" nut (x2)
My total cost was about $8
First take the 1/2" bolt and put it through the loop in the 3/8" i bolt
Then slide the 1/2" washer onto the bolt and tighten the nut down onto it tight.
Now just slide them into your door hinge and use the 3/8" nut to tighten them down so they dont move around and your done
There you go $8 foot pegs.
Im not responsible for anything that may go wrong in anyway and be aware of the risk involved when using foot pegs on your jeep