Finally getting together all my take offs. Figured I'd post them here in case any one needs them local before I post in the classifieds. Here is the stuff I have for sale:
Warn Bumper and Warn Winch Plate, $100 OBO each. They have some rock rash and minor surface rust where the paint was scrapped away. The bumper has the mounts for a bumper tow bar.
Harbor Freight winch plate, never installed for $30. I was going to use it a base for building a bumper but I ended up getting a bumper with a winch mount so I don't need it.
The following items are free to a good home. If no one takes them they are going to the scrap yard. The control arm bushings are in decent shape but a couple are bent. I have a second set of stock shocks from an LJ. The skid plates are pretty beat. The gas tank skid comes with samples of dirt from everywhere I've wheeled and the transfercase skid comes with an egg my son fried on it in the 117 degree heat.
I have some trailer wheels and tires for sale. Size of the tires is ST205/75D15 (quantity 2) mounted on 15x6 rims with 5x4.5 bolt pattern, also have 2 additional rims, same specs. Looking for about $100 for those tires and rims.
Also, have 2 small trailer wheels 4.80/4.00 mounted on rims that have a 4 on 4 bolt pattern (quantity 2). Looking for about $40 for those 2 tires and rims.
Factory Trunk for Jeep Wrangler. Came out of a TJ, not sure if it will fit other models. Bolts into factory location.
Hardware included. Lid props open and latches underneath to create a secure storage area behind the back seat for stowing valuables and other items. Gray carpeting on the lid (Carpeting has some water marks, but can easily be cleaned).
Started to clean my place up as I realized I have way too much crap in this small apartment!!
100' Ridgid extension cord ends light up 40$
Lights for working at night 20$
Drill press only thing is when drilling if too much pressure the bit stops spinning I know that there is 2 belts that look like they're missing. MAKE OFFER
Sony xplod 12" subs with box x2 20$/EA
Two gas cans metal. One is good condition other could be cleaned.
Will add more as I come across it all. Have to come pick up from my place.
Drill press only thing is when drilling if too much pressure the bit stops spinning I know that there is 2 belts that look like they're missing. MAKE OFFER
So it turns out my 2002 has the 2003 and newer hood so the Poison Spider Louvers I bought don't fit. They're new in the box unpainted. I unpacked them to paint them and realized they wouldn't fit then repacked them. I have $135 in them but I'll let them go for $100 if anyone is interested.
So it turns out my 2002 has the 2003 and newer hood so the Poison Spider Louvers I bought don't fit. They're new in the box unpainted. I unpacked them to paint them and realized they wouldn't fit then repacked them. I have $135 in them but I'll let them go for $100 if anyone is interested.
Could you just go to jeep, buy the correct window squirters, a "Y" and some hose and change your hood into a dual squirt setup? You're already cutting holes to install it so what's a couple extras?
I thought about it but I have so many other things on the list it was just easier to order the right one and sell this one. Plus the correct one doesn't say Poison Spider on it which is my preference.
That's a bit of a personal question, don't ya think? Rofl. Sorry.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Enthusiast Forums
18.5M posts
726.7K members
Since 2000
A forum community dedicated to all jeep owners and enthusiasts. Come join the discussion about performance, engine swaps, modifications, classifieds, troubleshooting, maintenance, and more!