I just put it on today it rides good so far. I used the RC adjustable track bar so I didn't have to change the pitman arm it rides good and wasn't to hard to install. It seems to be a decent kit for the price.
2010 Wrangler Rubicon Unlimited . Dented skids, scraped rims, mud stains on the seats.
2001 jeep Cherokee
First dirty pic of the new jeep after test run of the new suspension setup. I'm in desperate need of some good control arms. After this little test run I found out that the rear of jeep has almost no down travel with stock control arms and tracbar. It'll tote the back tires in just medium sized ruts.
Rock krawler Stock Mod 2.5, Bilstein 5100 series shocks, Mamba M5 18" rims, 285/65/18 Nitto Trail Grappler tires, Body Armor Front bumper w/winch and LOTS of LED lights all over the place for blinding oncomers! LOL
Mods: Zone 3" Lift springs and shocks Installed today -- Spidertrax 1.5" Wheel spacers -- Stock Sahara 18" Wheels -- Nitto Trail Grappler 35X12.5X18 -- OE Tire Carrier tailgate supports -- Tire carrier bump stops for full size spare -- Moved 3rd brake light higher --CB, yadda yadda. Oh, new front Highrock 4X4 High Access bumper is on it's way ;-)
Sorry for the lame Cell phone pics. I just picked her up and parked it outside of my office.
Can you help me understand how you put 12.5" wide tires on the stock rims? Don't they require at least 8.5" wide rims and the stock are 7.5"? I'm asking because I wanted to put wider tires on my stock Sahara (Altitude) rims but my tire guy said I couldn't go over 275s (11") because the rim was so narrow. Of all the threads about tire size, nobody ever seems to say, "that tire is too wide for that rim."