length of antirock link between threads
I currently installed my antirock on my TJ but I had to cut to much thread off and now I don't have enough for jam nuts to secure the rod ends.
I was wondering if the 6.5" JK link has a smaller gap between the threads where its just bare metal.
That would allow me to cut down an inch from both sides and still use the jam nuts.
So if anyone knows already or is by their JK today and has a measuring tape handy, could someone measure the distance between the threads on those links.
|The time now is 12:36 PM.|
Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.