Make mine a Jeep!
Originally Posted by fergyjk View Post
I am liking the Rugged Ridge alot!!!
I thinking of just fixing the thing, if that does not work then off to plan B!!!!
Once again thanks everybody!!!!!!
Slap a RR on it, and get the hoop to keep deer outa yer grill
2008 JK Silver Rubicon, 2 dr, 6 spd, pwr windows, tow package, slush mats, lockin gas cap, lug nut locks, shorty antenna, woven-wire grill guard, Cobra 75WXST, Wilson 3' Flex Antenna, Teraflex ant bracket, Highrock element doors, RR Grab Handles,RR Fire Ext Holder, RR bumper,Smittybilt 8k winch,Daystar 3/4 coil spacer on front, Kilby engine skid, Rockhard transfer case skid, Poision Spyder evap skid
I did the same thing. I drilled a small 1/8 dia hole in the center of the crease. Used a metal pick bent 90 degrees, somewhat like a dental pick that I got from an auto parts store. Stick it in the hole and pull gently while heating the area with a hair dryer. Fill the tiny hole with black rtv. Not perfect but better than the crease.
07 Sahara Unlimited
If it is the front bumper just drill a small hole and use compressed Air; it blow it right out (then plug it up if you want). For the rear plug up the drain holes except one and use the compressed air (use screws to plug it up). I got this out of magazine...tell me if it works well...
2008 JK Sahara Unlimited Steel Blue--For the Beach and Family
2005 LJ Rubicon Unlimited Black--For anywhere I want to go
Did you Wave to a JK today???
Same problem with dented bumper
I had the same problem, a dent on the drivers side stock front bumper on my 2014 Rubicon Unlimited. Used a standard blow dryer to warm up the section slowly until the plastic was soft and pliable. While continuing to apply heat, worked out the dent with my free hand. No holes, no drilling, no tools (other then a blow dryer and extension cord). Took less than 10 minutes start to finish. You can still see traces of the dent, but only because I know it's there. If you didn't know to look for it you probably wouldn't notice.
|dent removal , issues , JK Wrangler , modification , options , stock front bumper , wrangler|
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Jeep Forums||Replies||Last Post|
|Impact Fabworks front winch bumper, Rear bumper with swing away installed!!||DevilDogDoc||TJ Wrangler Technical Forum||20||07-23-2010 06:28 PM|
|Off road use, burning smell, dented bumper (pics)||ZeroGravity||YJ Wrangler Technical Forum||7||10-16-2009 03:50 PM|
|guys looking for a deal on front bumper or rear bumper with tire carrier...||79CHKCHK||Wrangler General Discussion||1||05-31-2009 12:41 PM|
|Front Bumper, Rocker Guards w/ Steps, Rear Bumper w/ Tire Carrier||VaLoRiaN||TJ Wrangler Technical Forum||23||04-28-2007 08:07 AM|
|front shocks are getting dented in any ideas?||pushead||YJ Wrangler Technical Forum||6||01-27-2005 11:59 AM|