So I tried to search, but that isn't working right now. I plan on starting the 5 tire rotation this weekend (about time for the first one) and I'm a little confused about the Tire pressure monitors. Is there a way to activate/reprogram where each tire is, or do only 4 of them have sensors?
Also, with the stock BFG M/Ts, a five tire rotation will be fine correct? I see a lot of varying viewpoints on whether radial tires should be swapped to the other side or not.
All five tires have sensors. Your JK knows which tire is the spare and doesn't monitor its pressure while on the spare mount. No matter what tire is on the spare rack, it always shows pressures for the four tires on the ground.
I can't tell you if it re-learns which tire is at what corner, but I'm betting that is the case.
I'd definitely do 5 tire rotations, especially with Mud Terrains. I rotated mine a few weeks ago... They do wear quickly.
'14 WK2 Overland
'13 JKU Rubicon
Jeeps past 01 XJ, 08 JK, 11 KK
"A tire pressure monitoring sensor is located in the spare wheel if the vehicle is equipped with a matching full size spare wheel and tire assembly. The matching full size spare tire can be used in place of any of the four road tires"