[asa]

which body lift and motor mount lift would you buy???

[Rocky529]

Performance Accessories Body Lift or JKS Body Lift

Daystar, MORE, or Brown Dog MML

[Rule303]

JKS budget MML. Lets you retain the rubber mounts for better vibration isolation.

[yellj]

MORE with rubber bushings, beefiest out there, except for possibly Brown Dog or something like that

[JeepRocks86]

I have the MORE BL and MML their great

[bsruther]

I will probably get a set of Brown Dog MMs and make my own BL.

[Difranco]

Odds are the rubber in your stock motor mounts and stock body mounts are starting to deteriorate, dry out and possibly crack. Especially living in the Northeast where the roads are salted pretty heavily during the winter months. Polyurethane will not deteriorate when exposed to environmental contaminates like rubber does.

I'm sure getting everything apart is going to be a real pain so I'd try to do everything I could to only have to do it once.

In which case I'd go with Brown Dog Industries 1" Motor Mount Lift and Daystar Comfort Ride 1" Body Lift.

[Hydro]

I have the Daystar BL and the Brown Dog MML and love them both.

-Mike

[Grewe02]

I vote for JKS 1.25" BL and MORE / Brown Dog MML

[arbby]

hockey pucks and brown dog!

[happycamper]

jks bl and brown dog mm lift

[Erik T.]

Originally Posted by Rocky529

Performance Accessories Body Lift or JKS Body Lift

Daystar, MORE, or Brown Dog MML

x2





10 chars

[Brown Dog]

I have serial number 1 Brown Dogs on my 91 Wrangler. Thanks for all the support in this thread!!

[Jerry Bransford]

Originally Posted by Difranco

Odds are the rubber in your stock motor mounts and stock body mounts are starting to deteriorate, dry out and possibly crack.

Not very darned likely for a 2000 vehicle, especially since rubber body and engine mounts generally outlast the Jeep itself. I helped a friend do a frame-up restoration on his '73 CJ5 that spend most of its life in harsh winters and both of us noticed the good condition of its rubber body mounts after lifting the tub off. I might go along with them being worn out on an eighties YJ but not yet on a still fairly new TJ. Plus I'll never recommend polyurethane body or engine mounts as my experience with them is they transmit more vibration than I like. I installed polyurethane engine mounts and felt the additional vibes right away. One of the welds broke on those mounts so I went back to rubber isolators on MORE engine mounts and the vibes went away.

[Wheelin98TJ]

Rusty's sells a 1" BL for $59.

I'd go with Brown Dog for the MML.