Time for a Stretch...A Buildup Thread - Page 6

BigJeepJay · 03-04-2007, 11:13 PM

Some Misc Stuff...

I put down a coat of Black Herculiner

And found a home for my switch panel.

cb19950 · 03-04-2007, 11:15 PM

Quote:

Originally Posted by BigJeepJay

Some Misc Stuff...

I put down a coat of Black Herculiner

And found a home for my switch panel.

you got an ejector seat in there or somthin?

BigJeepJay · 03-04-2007, 11:16 PM

Now Onto building the frame Half-Back

As you can see here, we cut the top section and bended it over the new square stock to get a better welding area

Getting it all in place

Welding it

BigJeepJay · 03-04-2007, 11:18 PM

Finish Welded Product

From here you can really see the bend of the rear frame

BigJeepJay · 03-18-2007, 11:16 PM

Here is a quick picture update

Fuel Filters and Pump w/ AN fittings ready to be plumbed in

Cage Tie In

Sitting at Ride Height, Coilover FULLY extended

Crossmember Completed

BigJeepJay · 03-18-2007, 11:16 PM

Driver’s Side Rear Suspension…getting measurements. Each link will be mounted 24” from the center of the Diff and both are angled with 3/8 of a pitch towards the T-case.

Here is the Wheelbase

BigJeepJay · 03-18-2007, 11:21 PM

POR15'In anything that will rust

The Gusset we made for the Frame Tie-In

Sitting on 39.5's

Here is the bracket we made for the coilovers...fully adjustable to change up/down travel limits

tweba99 · 03-19-2007, 08:11 AM

Looks good. Is that with the 106" wheelbase you were shooting for? Is all of the stretch in the rear in those pictures?

silvergreentj · 03-19-2007, 09:26 AM

Sitting on 39.5's

these made me cry

incredible look and functionality

BigJeepJay · 03-19-2007, 11:01 AM

Quote:

Originally Posted by tweba99

Looks good. Is that with the 106" wheelbase you were shooting for? Is all of the stretch in the rear in those pictures?

Thanks Man

I think it measures out to 107" but I will heave to check the final numbers...I ended up getting about 3-4" out fo the front so I didn't have to take it all out of the rear.

**JeepRocks86** · 03-19-2007, 11:22 AM

looks good, I'll trade you...

tweba99 · 03-19-2007, 11:34 AM

Quote:

Originally Posted by BigJeepJay

Thanks Man

I think it measures out to 107" but I will heave to check the final numbers...I ended up getting about 3-4" out fo the front so I didn't have to take it all out of the rear.

Really? You are going full hydro through, so you didn't have to mess with moving the steering box, correct?

**HolidayJeep** · 03-19-2007, 11:36 AM

wow .

koheed · 03-19-2007, 12:20 PM

I just wanted to take the time to say Thank You for documenting all the work you've done.

**JeepRocks86** · 03-19-2007, 01:00 PM

You should bring it to Tellico in July... See my sig.

03-04-2007, 11:16 PM	#78
BigJeepJay Registered User Join Date: Aug 2004 Location: Freetown, Ma Posts: 2,110 Profile Gallery Classifieds My Jeeps	Now Onto building the frame Half-Back As you can see here, we cut the top section and bended it over the new square stock to get a better welding area Getting it all in place Welding it __________________ Pics... [URL="http://smg.photobucket.com/albums/v516/JeepJay/"]http://smg.photobucket.com/albums/v516/JeepJay/[/URL] TJ Stretch Thread... [URL="http://www.jeepforum.com/forum/showthread.php?t=348220&page=3"]http://www.jeepforum.com/forum/showthread.php?t=348220&page=3[/URL]

03-04-2007, 11:18 PM	#79
BigJeepJay Registered User Join Date: Aug 2004 Location: Freetown, Ma Posts: 2,110 Profile Gallery Classifieds My Jeeps	Finish Welded Product From here you can really see the bend of the rear frame __________________ Pics... [URL="http://smg.photobucket.com/albums/v516/JeepJay/"]http://smg.photobucket.com/albums/v516/JeepJay/[/URL] TJ Stretch Thread... [URL="http://www.jeepforum.com/forum/showthread.php?t=348220&page=3"]http://www.jeepforum.com/forum/showthread.php?t=348220&page=3[/URL]

03-18-2007, 11:16 PM	#80
BigJeepJay Registered User Join Date: Aug 2004 Location: Freetown, Ma Posts: 2,110 Profile Gallery Classifieds My Jeeps	Here is a quick picture update Fuel Filters and Pump w/ AN fittings ready to be plumbed in Cage Tie In Sitting at Ride Height, Coilover FULLY extended Crossmember Completed __________________ Pics... [URL="http://smg.photobucket.com/albums/v516/JeepJay/"]http://smg.photobucket.com/albums/v516/JeepJay/[/URL] TJ Stretch Thread... [URL="http://www.jeepforum.com/forum/showthread.php?t=348220&page=3"]http://www.jeepforum.com/forum/showthread.php?t=348220&page=3[/URL]

03-18-2007, 11:16 PM	#81
BigJeepJay Registered User Join Date: Aug 2004 Location: Freetown, Ma Posts: 2,110 Profile Gallery Classifieds My Jeeps	Driver’s Side Rear Suspension…getting measurements. Each link will be mounted 24” from the center of the Diff and both are angled with 3/8 of a pitch towards the T-case. Here is the Wheelbase __________________ Pics... [URL="http://smg.photobucket.com/albums/v516/JeepJay/"]http://smg.photobucket.com/albums/v516/JeepJay/[/URL] TJ Stretch Thread... [URL="http://www.jeepforum.com/forum/showthread.php?t=348220&page=3"]http://www.jeepforum.com/forum/showthread.php?t=348220&page=3[/URL]

03-18-2007, 11:21 PM	#82
BigJeepJay Registered User Join Date: Aug 2004 Location: Freetown, Ma Posts: 2,110 Profile Gallery Classifieds My Jeeps	POR15'In anything that will rust The Gusset we made for the Frame Tie-In Sitting on 39.5's Here is the bracket we made for the coilovers...fully adjustable to change up/down travel limits __________________ Pics... [URL="http://smg.photobucket.com/albums/v516/JeepJay/"]http://smg.photobucket.com/albums/v516/JeepJay/[/URL] TJ Stretch Thread... [URL="http://www.jeepforum.com/forum/showthread.php?t=348220&page=3"]http://www.jeepforum.com/forum/showthread.php?t=348220&page=3[/URL]