Jeep Enthusiast Forums banner

pulling my Tj behind RV? plus...

586 views 4 replies 4 participants last post by  stathunter 
#1 ·
have 97 TJ 5 speed manual
I know to put drive train in neutral, but someone is telling me to put shifter into 5th gear to keep plates lubricated.

is this correct?

and is there a search function on this forum??

thanks for any input.

Matt
 
#2 ·
#3 ·
For flat towing the owner's manual ('97) says to:

1. Shift TC to 2H and makes sure 4WD light goes out

2. Drive vehicle 10 ft. rearward and then 10 ft.forward to make sure axle is disengaged

3. Shift transmission to N

4. Turn off the engine with the ignition key in the unlocked OFF position

5. Shift TC lever from 2H to N

6. Shift manual transmission into gear or automatic transmission into P


one of the links provided the

the information I was looking for !!!
thanks for your help !!!

Matt
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top