JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   TJ Wrangler Technical Forum (http://www.jeepforum.com/forum/f9/)
-   -   MONSTALINER- bedliner (http://www.jeepforum.com/forum/f9/monstaliner-bedliner-906676/)

UltimateCC 11-20-2009 07:52 PM

MONSTALINER- bedliner
 
Well I was looking for a liner to put down in our project K5 blazer at the shop and was debating between herculiner, U-POL and rhinoliner or lineX. There is no budget with this build but I have used the roll on herculiner in the past and was really impressed with it for the money. Then came along Monstaliner and after some discussion/research I was sold and figured we would give it a try. Check out monstaliner.com for more details about the product. The big selling point for me was the finish. I really hated how hard it was to clean the herculiner being how gritty it is. The monstaliner had a much smoother finish more like some of the spray on liners. The kit comes with everything you need and has some very detailed instructions that I highly suggest you reading if its your first time using the product. It will save you a lot of headaches and time while installing the Monstaliner. After having this stuff in our blazer for over a week now I have to say I am pretty impressed with not only the finish but the durability. I will update this thread in the future with how it last long term but I have no doubts it will be holding up great.

All photos were taken by AMCPHOTOS: more pics can be found at http://amcphotos.zenfolio.com/


ONE OF THE FIRST SHOTS WE HAVE OF THE RIG
http://ultimatecollisioncenter.zenfo...24098296-4.jpg
MONSTALINER AND ULTIMATE COLLISION CENTER :)
http://ultimatecollisioncenter.zenfo...20081756-4.jpg
ADDING THE CATALYST
http://ultimatecollisioncenter.zenfo...12799921-4.jpg
MIXING
http://ultimatecollisioncenter.zenfo...01266362-4.jpg
THE MIXER SUPPLIED WITH THE KIT
http://ultimatecollisioncenter.zenfo...14939334-4.jpg
SCUFF THE AREA TO CREATE A NICE SURFACE FOR THE MONSTALINER TO BIND TO BUT DO NOT GO ALL THE WAY DOWN TO BARE METAL
http://ultimatecollisioncenter.zenfo...48128181-4.jpg
CLEAN THE AREA
http://ultimatecollisioncenter.zenfo...07422854-4.jpg
PRIMER ANY RAW METAL
http://ultimatecollisioncenter.zenfo...49336973-4.jpg
POUR SOME MONSTALINER INTO THE SUPPLIED TRAY
http://ultimatecollisioncenter.zenfo...98794721-4.jpg
USE A BRUSH TO GET ANY AREAS THAT WOULD BE DIFFICULT WITH THE SUPPLIED ROLLERS
http://ultimatecollisioncenter.zenfo...23680295-4.jpg
USING THE SUPPLIED ROLLERS TO LAY DOWN A NICE THICK FIRST LAYER
http://ultimatecollisioncenter.zenfo...15354240-4.jpg
MAKE SURE YOU REMEMBER TO PUT GLOVES ON OTHERWISE YOU WILL BE WEARING MONSTALINER FOR A FEW DAYS
http://ultimatecollisioncenter.zenfo...38809189-4.jpg
BEFORE
http://ultimatecollisioncenter.zenfo...33313205-4.jpg
AFTER FIRST COAT BUT STILL WET
http://ultimatecollisioncenter.zenfo...41319631-4.jpg
AFTER A FEW DAYS OF CURING
http://ultimatecollisioncenter.zenfo...43592540-4.jpg

http://ultimatecollisioncenter.zenfo...34974200-4.jpg

http://ultimatecollisioncenter.zenfo...63665443-4.jpg

http://ultimatecollisioncenter.zenfo...33221115-4.jpg

UltimateCC 11-20-2009 07:59 PM

I will be adding a step by step of a monstaliner product in my LJ shortly...I am just waiting for them to have a tintable version available.

2006_Sport 11-20-2009 08:01 PM

It's ok. Looks better than herc but looks like it would be really slick when it's wet.

UltimateCC 11-20-2009 08:08 PM

It looks like it would be but it really isn't. If you see that last picture of how the stuff lays down up close it is actually pretty coarse.

DaleII 11-20-2009 09:09 PM

That is a pretty good picture. Good looking :thumbsup:

Unlimited04 11-20-2009 10:00 PM

damn, somebody read the macro setting instructions on the digital camera.

UltimateCC 11-21-2009 07:39 AM

thats for sure haha

LJinNOLA 11-21-2009 07:47 AM

Looks good. The pics are awesome. We should all aspire to only upload quality pics like yours. Given the liner any abuse yet?

UltimateCC 11-21-2009 07:57 AM

Well when we put back the interior we were far from gentle with the seats to see how it would hold up and not a scuff, scratch or mark...we haven't put anything real hard or heavy on it yet but I assume it would hold up just fine but I will update everyone after we put it through a few more tests.

UltimateCC 11-23-2009 09:16 AM


All photos were taken by AMCPHOTOS: more pics can be found at Zenfolio | AMCPHOTOS

lilirish10245 01-11-2010 02:37 PM

Well thats enough for me I'm ordering some. How much of the product did you use?

jeepinmichguy_ 01-11-2010 02:56 PM

hmmm, that stuff looks nice and not to hard to install.

bige2533 01-11-2010 04:49 PM

What's up with wearing gloves for mixing but not for applying it?

lil-jmart13 01-11-2010 05:01 PM

sold! where can i buy it?

UltimateCC 01-11-2010 08:11 PM

we bought it directly from monstaliner. we had them on initially then took them off and totally regretted it...


The time now is 12:58 PM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.