I have a 97 Wrangler 4.0 auto with a 3.25" lift riding on BFG AT 32x11.5x15 tires. What is the proper size bump stop I should have installed?
Originally Posted by rda616 View Post
You'll definitely want to get the proper bump stops in place to ensure that you don't hurt the shocks or have issues with the tires interfering with the body. Cycle the suspensions and see what currently limits travel, if it's the shocks being fully compressed you'll need to measure and extend your bump stops accordingly. Check out post #5 http://www.jeepforum.com/forum/f9/pr...1/#post4508778
Let us know if you have any other questions!
This post/info=my opinion
TJ Tech BOOT CAMP-A Must Read!
FAQ: Cold Air Intakes & K&N's
Off-Road Tips and Techniques
TJ Track Bar Clearance Issues
What is a CV shaft and why do I want one?
So you want a Tummy Tuck?
Tire size, lift height, bumpstops & shock guide
DIY Shock Shifters for Long Travel Shocks
Busted TJ Track Bar Bolt Fix
Brake Knuckle Divot/Groove Repair
Lift Install & Suspension Lessons Learned
Fabrication & Build: My Build Thread
Funny: Will it fit in my Jeep?
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|