[ejwithacj]

I picked up a used mopar fuel injection kit and installed it on my 84 cj7 / 258 / 5spd manual. I've double and triple checked all of the install steps, but the thing still won't start ... no spark. I've replaced cap and coil and the crankshaft position sensor. I've got power at the coil, the cps checks out ok, the yellow wire is connected and I've checked it out with a meter, no codes when I hook up to the computer. Anybody got any ideas where to go next? If I open up the computer will I find some fuses that could be blown? I'm pretty lost at this point.

[wrongway92407]

I think there is a red wire that goes directly to the batt that has an inline fuse, If you can't get it to work call the guys at hesco.

[lugnut28]

Call Hesco, ask for Bennie, and explain exactly what it is doing and he will walk you through it step by step.