Dana 300 yoke to a xj cv shaft? - JeepForum.com

 
LinkBack Thread Tools
post #1 of 5 Old 09-10-2008, 06:23 PM Thread Starter
muddyjeepguy85
Registered User
1983 CJ7 
 
Join Date: Oct 2004
Location: western new york
Posts: 93
Dana 300 yoke to a xj cv shaft?

I have a cj7 with a dana 300 TC, ive put in a front drive shaft from a xj with the double cardon joint in the as my rear drive shaft, now my problem is finding a yoke to fit the threaded holes on the shaft to the yoke on the TC, ive found a couple on ebay that are for a dana 35 for an XJ and have a 26 spline just like the dana 300 but not to sure if i should get it. anybody got any input.

muddyjeepguy85 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 Old 09-10-2008, 07:41 PM
gojeepin
Registered User
1983 CJ7 
 
Join Date: Feb 2006
Location: Indianapolis
Posts: 3,441
I did something like what you did and got the yoke from an NP 231 TC (front yoke). Same spine count and it fits fine.

And if you can't find that there's always eBay.
http://cgi.ebay.com/Jeep-Dana-300-13...QQcmdZViewItem

Vibration? Bump steer? Wandering? Read the article (sticky) on Steering, suspension, and driveline.

Last edited by gojeepin; 09-10-2008 at 07:45 PM. Reason: clarified which side of NP231
gojeepin is offline  
post #3 of 5 Old 09-10-2008, 08:27 PM
JeepnBlake
Registered User
2004 TJ Wrangler 
 
Join Date: Jan 2008
Location: Lincoln Nebraska
Posts: 3,267
http://www.dennysdriveshaft.com/p238...26_spline.html

i'm in the exact same boat as you are lol
JeepnBlake is offline  
post #4 of 5 Old 09-11-2008, 06:24 PM
jeepskate
Web Wheeler
1986 CJ7 
 
Join Date: Aug 2004
Posts: 4,701
Didn't we just tell you what to buy last week? http://www.jeepforum.com/forum/f8/adapter-double-cardon-joint-601687/

'86 CJ-7 Laredo: 4.2,T-999,D300,D30/D44,'94 YJ tub, full cage, Shrockworks rockers, OYR corners, AC,cruise,restored seats,3 tops,2.5" Superlift,F-T shackle reversal, RS9000x's,35" Dunlop Mud Rovers.
'83 Scrambler: time & money pit under construction with parts from CJ's,YJ's,TJ's,FSJ's,GM,Ford,IH,Honda,Toyota and a whole lotta aftermarket & custom stuff.
http://www.jeepskate.net
jeepskate is offline  
post #5 of 5 Old 09-11-2008, 06:35 PM
84MSRB
Registered User
1984 CJ7 
 
Join Date: May 2006
Location: OH-IO
Posts: 750
Just how long is the XJ CV shaft? Will that take care of my problem- need over an inch more length.

1984 CJ7 Mud Slingin Rust Bucket
90 YJ tub
Ford Mutt 5.0( 69 block, 89 EFI)
84MSRB is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
Stock Yoke on Dana 300 budacj7 Jeep CJ Forum 1 07-15-2008 11:03 AM
Torque for yoke on Dana 44? mud4me Jeep CJ Forum 4 04-25-2008 07:10 AM
Dana 20 / CV yoke BIG REED Jeep CJ Forum 3 08-25-2007 01:25 AM
Rear diff. drive shaft yoke RobP13 Jeep CJ Forum 8 11-22-2006 04:40 PM
Drive Shaft Slip Yoke disa Jeep CJ Forum 2 12-30-2004 07:43 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome