Jeep Enthusiast Forums banner

Crown Body Bushing Hardware length

509 views 2 replies 2 participants last post by  yellow85cj 
#1 · (Edited)
I bought a Crown body bushing kit for my CJ-5. Everything looks good except the Crown inner sleeves are longer (1 - 9/16") than stock (1-3/16"). So do I cut the Crown hardware down or use them as supplied?

Picture shows the difference, new stuff on the left....39 year old stock stuff on the right. Guess that's obvious.
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top