Clay's Build Thread - Page 64 - JeepForum.com

Reply
 
LinkBack Thread Tools
post #946 of 5422 Old 01-14-2011, 03:49 PM Thread Starter
Skerr
Registered User
1985 CJ7 
 
Join Date: Sep 2008
Location: White Springs
Posts: 9,494
Quote:
Originally Posted by torque View Post
Being one of four is nothing to scoff at he was in the top 20%.
Welding is not that bad once you get the hang of it, but then again your first times doing it and knowing you are getting graded can make some of us nervous. Not to mention that no one is a pro at the begining.

When I was in shop class the teacher didn't let us adjust the welder at all so if it was set up too hot for us we had to deal with it. Maybe his teacher had it set up wonky or had crappy electrodes w/e the case may be.

Tell Clay to keep his smile he earned it! I have a project I am going to start here soon and I have been reading and following this build I read almost all of it and It has really given me confidence so you guys should know that your build thread is more than just a story or a progression for some of us. I can't wait for the next post and I check the thread constantly. I am living vicariously through your build since I cant start mine yet.
Torque... thanks for the kind words, Bro. It makes me happy if you can find something useful in this thread. My thread was started because of the motivation caused by other JF members. We are truly a support group!

I should have said that Clay's test was a WRITTEN test. They have been studying OSHA rules and safety stuff. After the written test they were allowed to practice running beads. Today Clay came home with his 3/8 plate and showed me the beads he did this afternoon. He has nearly covered the entire surface with beads! The poor plate is warped beyond belief, but what a great learning tool! You can SEE what extreme heat does to steel if you stay on it too long. I'll get some pics up this evening!


Kerrdog
Go Fish! <*////><

But the right word at the right time... "Hey, give me a little hug!" That's the difference between lightning and a harmless lightning bug!
Skerr is offline  
Sponsored Links
Advertisement
 
post #947 of 5422 Old 01-14-2011, 03:54 PM
torque
Registered User
1996 YJ Wrangler 
 
Join Date: Mar 2006
Location: PA
Posts: 150
Oh well then that changes it all HA HA!
Welding hasn't a thing to do with paper, As long as he can run those beads and recognize a Fire hazard I say let the boy have at it.

BTW I am no pro welder, not even on the internets. I do it now and again when I have to at work but that is about it.
torque is offline  
post #948 of 5422 Old 01-14-2011, 04:16 PM Thread Starter
Skerr
Registered User
1985 CJ7 
 
Join Date: Sep 2008
Location: White Springs
Posts: 9,494
Clay cut out his plate with the torch. It's maybe 4" X 10". Using a digital stick welder set at 89 DC Amps, and 7018 rods. He was excited about all of this... cutting out the piece and welding all these beads! I can remember...
Attached Thumbnails
100_1196_1.JPG   100_1198_1.JPG  

Kerrdog
Go Fish! <*////><

But the right word at the right time... "Hey, give me a little hug!" That's the difference between lightning and a harmless lightning bug!
Skerr is offline  
post #949 of 5422 Old 01-14-2011, 04:35 PM
Jim1611
Web Wheeler
 
Jim1611's Avatar
1985 CJ7 
 
Join Date: Jul 2009
Posts: 7,090
Looks to me like you have a welder upcoming in the family Scott. He's catching on quick too!! I think I was Clay's age when I first started welding. You're right it does bring back memories. It sure is good to see a fine young man pursuing a trade. You ought to be proud of him. I am!
Jim1611 is online now  
post #950 of 5422 Old 01-14-2011, 05:22 PM
Davidnex
Registered User
1979 CJ5 
 
Join Date: Dec 2009
Location: Poway
Posts: 505
Nice beads Clay, Scott does Clay ever get to post???

79 CJ 5 Frame up Build
http://www.jeepforum.com/forum/f8/79-cj-5-frame-up-1092681/
Davidnex is offline  
post #951 of 5422 Old 01-14-2011, 05:37 PM
SonicR1
Registered User
2005 TJ Wrangler 
 
Join Date: Jan 2010
Location: CenCal
Posts: 1,512
DANG!!!! My welds with a mig aren't that nice!!! hehehehe

... I guess I'm gonna have to fix that too…….

The TJ
2005 Wrangler X 4.0/6 speed, Dana 30/Ford 8.8--4.88--Eaton E-Lockers, 35" MT/R, Smittybilt bumpers/rockers/winch, SonicFab tire carrier, RE 3.5 springs, Zone 1.25 BL, FullTraction 3 link upper rear, RE super flex lower rears, UCF ultra high skid and lo/pro mount, brown dog mml.

1974 CJ5 BUILD THREAD
SonicR1 is offline  
post #952 of 5422 Old 01-14-2011, 06:10 PM
243
Registered User
1978 FSJ Cherokee 
 
Join Date: Sep 2002
Posts: 3,380
Great job Clay

1978 Cherokee, TBI 360/T400/QT...6.0/6L80/NP241C in the works...
243 is offline  
post #953 of 5422 Old 01-14-2011, 06:21 PM
Eaglekeeper
Registered User
1986 CJ7 
 
Join Date: May 2010
Location: Panama City
Posts: 828
Scott. Congrats to Clay for passing the test and doing some serious metal burns. Bet he had a ball doing them.
Eaglekeeper is offline  
post #954 of 5422 Old 01-14-2011, 08:12 PM Thread Starter
Skerr
Registered User
1985 CJ7 
 
Join Date: Sep 2008
Location: White Springs
Posts: 9,494
Thanks everyone for the support. I am having a blast taking Welding 1. Yesterday was the first day I used the cutting torch or welder... and I didn't exactly do a very good job. I kept sticking the rod to the metal, and could not figure out what I was doing wrong. Finally, today, someone happened to notice what I was doing and told me to strike the rod like a match. After that, I did pretty well (and started going through rods like there was no tomorrow).

I'm looking forward to next week.

Thanks again.



-Clay

Kerrdog
Go Fish! <*////><

But the right word at the right time... "Hey, give me a little hug!" That's the difference between lightning and a harmless lightning bug!
Skerr is offline  
post #955 of 5422 Old 01-14-2011, 08:17 PM Thread Starter
Skerr
Registered User
1985 CJ7 
 
Join Date: Sep 2008
Location: White Springs
Posts: 9,494
That's my son ^^^ Clay. When you want him to talk, he says nothing. When you want some peace and quiet, you can't make him stop!

Kerrdog
Go Fish! <*////><

But the right word at the right time... "Hey, give me a little hug!" That's the difference between lightning and a harmless lightning bug!
Skerr is offline  
post #956 of 5422 Old 01-14-2011, 08:38 PM
Davidnex
Registered User
1979 CJ5 
 
Join Date: Dec 2009
Location: Poway
Posts: 505
Good post Clay. MIG easier than stick ( my unqualified opinion), keep up the good work, I admire you energy on your built..

79 CJ 5 Frame up Build
http://www.jeepforum.com/forum/f8/79-cj-5-frame-up-1092681/
Davidnex is offline  
post #957 of 5422 Old 01-15-2011, 05:19 PM Thread Starter
Skerr
Registered User
1985 CJ7 
 
Join Date: Sep 2008
Location: White Springs
Posts: 9,494
Clay turns 17 on Tuesday. We had a surprise party for him this afternoon. Bunch of people came over and ran around, played volleyball, went down to the river, etc. I thought it would be cool to have a bonfire! So I started to put it together.

Got the tractor out, hooked up the boom, grabbed a chain and went to work.


Went out to where we have our burn pile and gathered up a bunch of logs and wood left over from doing some clearing.


Made a NICE pile and burned all the way around the perimeter for a fire break.


Lit it off so it would be "right" when it got cold.



This was completely wasted on the teens! Nobody even went to LOOK at it. One of the kids told me that my yard was on fire. Oh my aching back... I wish I'd had some CJ Buddies instead!!

Kerrdog
Go Fish! <*////><

But the right word at the right time... "Hey, give me a little hug!" That's the difference between lightning and a harmless lightning bug!
Skerr is offline  
post #958 of 5422 Old 01-15-2011, 05:33 PM
Jim1611
Web Wheeler
 
Jim1611's Avatar
1985 CJ7 
 
Join Date: Jul 2009
Posts: 7,090
Happy birthday to Clay!!

Scott you all sure have a nice place. Hey we could sit in lawn chairs around that fire and really enjoy ourselves. I built a fire here for the grandkids and kids last summer and they acted the same. Only use older folks really got any use out of it.
Jim1611 is online now  
post #959 of 5422 Old 01-15-2011, 05:53 PM
SonicR1
Registered User
2005 TJ Wrangler 
 
Join Date: Jan 2010
Location: CenCal
Posts: 1,512
I would have enjoyed that… When we had our land, I loved sitting out back in the cold gathered around the fire pit… never figure out a way to enjoy it during the rain… I hate the rain for the most part, but enjoy it when Jeeping, and when I can sit and listen to it. Even better is sitting around an outdoor fireplace in the snow. Got to do that in Tahoe one year, that was pretty stinkin cool!!!

HAPPY BIRTHDAY CLAY!!!!

... I guess I'm gonna have to fix that too…….

The TJ
2005 Wrangler X 4.0/6 speed, Dana 30/Ford 8.8--4.88--Eaton E-Lockers, 35" MT/R, Smittybilt bumpers/rockers/winch, SonicFab tire carrier, RE 3.5 springs, Zone 1.25 BL, FullTraction 3 link upper rear, RE super flex lower rears, UCF ultra high skid and lo/pro mount, brown dog mml.

1974 CJ5 BUILD THREAD
SonicR1 is offline  
post #960 of 5422 Old 01-15-2011, 05:57 PM
Eaglekeeper
Registered User
1986 CJ7 
 
Join Date: May 2010
Location: Panama City
Posts: 828
Scott, when you build a bonfire, you don't hold back.

I....Like....It
Eaglekeeper is offline  
Reply

Tags
1979 , cj5 , fiberglass , rollcage , tailgate

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
19?? CJ7 build thread biker250 Jeep CJ Forum 96 12-27-2010 06:10 AM
Looking for a CJ Build Thread. jsc7002 Jeep CJ Forum 6 08-22-2009 10:47 AM
High 5 Build Thread... 1Rustycj5 Jeep CJ Forum 7 03-22-2009 09:28 PM
Build Thread for my '84 CJ erik5387 Jeep CJ Forum 19 05-29-2008 01:05 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome