JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   Jeep CJ Forum (http://www.jeepforum.com/forum/f8/)
-   -   CJ File Sharing....DXF, DWG (http://www.jeepforum.com/forum/f8/cj-file-sharing-dxf-dwg-1521626/)

WSS 05-10-2013 06:45 PM

CJ File Sharing....DXF, DWG
 
OK, looks like we can post up our cad files!

If possible, post a pic (jpg) of the file.

<PLEASE DO NOT POST DRAWINGS YOU DID NOT DRAW YOURSELF>

Lets observe the rule of "if you did not draw it, do not post it"

This will keep the forum mods and admins out of trouble and the thread open for all to utilize!

Admin and mods, please feel free to delete or modify any posts (attachments) you find that break any rules.

ENJOY!

WSS

WSS 05-10-2013 06:48 PM

CJ dash files
 
7 Attachment(s)
Here are some files of a dash I just completed.

EgulAye 05-15-2013 11:56 AM

Nice WSS,
What about stuff that isn't quite CJ specific? I drew up a wooden frame that I'll use to lift the motor out of myCJ, and also the US flag that I plan to cut out and use as a stencil to paint on the hood. Figured I'd ask first.
Thanks for the dash drawings too!

WSS 05-16-2013 02:51 AM

Quote:

Originally Posted by EgulAye (Post 15435880)
Nice WSS,
What about stuff that isn't quite CJ specific? I drew up a wooden frame that I'll use to lift the motor out of myCJ, and also the US flag that I plan to cut out and use as a stencil to paint on the hood. Figured I'd ask first.
Thanks for the dash drawings too!

I would say go for it. If it can be used on a CJ, perfect. There is a cad thread over on the fabrication section for all fab stuff, might want to try that too.

http://www.jeepforum.com/forum/f37/c...sible-1521971/

:tea:


ps, a new slogan for the CJ section:

BUILT NOT BOLTED

:laugh::laugh:

EgulAye 05-16-2013 01:37 PM

US Flag
 
2 Attachment(s)
I drew the US Flag at 10X scale so that it would come out at 10" x 19" when I printed it. I used the proportions as provided by USFlag.org.

http://i1293.photobucket.com/albums/...psed9fff93.jpg

my_304_cj7 05-17-2013 12:59 PM

I just wanted to throw this out there for people that do not have access to CAD or are intimidated by it. Google Sketchup is an awesome program for home design use with a ton of support on the web including access to thousands of drawings. I am an engineer with a ton of experience in CAD and I use sketchup at home because of it's support. I used it to design my rear bumper. I found a drawing of a Jeep that someone had uploaded so that I could see my design on the vehicle before touching a piece of metal.

Bobs85Reny 05-17-2013 01:27 PM

2 Attachment(s)
I had redrawn 82 Renegade Decals

84scrambler 05-27-2013 02:17 AM

2 Attachment(s)
Factory dash that I measured out and drew from my 84 CJ8

WSS 05-27-2013 02:36 AM

Quote:

Originally Posted by 84scrambler (Post 15484841)
Factory dash that I measured out and drew from my 84 CJ8

I'll take one of those! Thanks.

:thumbsup:

DeafJeep 05-27-2013 03:55 PM

So many ideas ! :D

Jeeprage 05-29-2013 12:32 PM

Quote:

Originally Posted by Bobs85Reny (Post 15445895)
I had redrawn 82 Renegade Decals

Nice. Just saved to see if a friend of a friend can make these for me.

waterdowg 05-30-2013 08:31 PM

Quote:

Originally Posted by Bobs85Reny (Post 15445895)
I had redrawn 82 Renegade Decals

Bob those are 84 decals. Ask me how know :D

Ikelovey 06-06-2013 10:31 AM

Just came across this today - Enjoy !
http://jalopnik.com/extreme-jeep-dri...ring-510940754

84scrambler 06-13-2013 11:46 AM

10 Attachment(s)
Here are some .jpg of some brackets that I did when I ran my fuel and brake lines. This was more of a custom job but maybe some of you can use it. I am attaching everything as a .jpg for now. Me and .dxf files don't get along so just shoot me a PM and I can e-mail you a step or parasolid file. Also notice that all but one of these clamps are not split in half. I used a wire EDM machine to cut these up and left a gap in the middle to compensate for the .010" thick wire plus spark gap (so if you need two separate drawings just take out .014" out of the middle). If anybody has any issues with the drawings let me know I can fix them up and make them easier.

84scrambler 06-13-2013 11:59 AM

5 Attachment(s)
A few more


The time now is 10:11 PM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.