I have a '78 CJ5 which had the AMC 304. I swapped in an AMC 360. I need to connect my vacuum hoses to the evap canister which looks like the one shown here: http://home.sprynet.com/~dale02/evaporat.htm
The cap on the left side where the dist ported vac and PCV manifold vac connect is broke open on mine. My question is are there any moving parts on an evap canister? Could I just use this one from a Fiero: http://cgi.ebay.com/ebaymotors/Fier...uck_Parts_Accessories?_trksid=p4506.m20.l1116
I know the one from the Fiero only has 3 ports, but could I just "T" my carb bowl vent and gas tank vent to the third port?
The cap on the left side where the dist ported vac and PCV manifold vac connect is broke open on mine. My question is are there any moving parts on an evap canister? Could I just use this one from a Fiero: http://cgi.ebay.com/ebaymotors/Fier...uck_Parts_Accessories?_trksid=p4506.m20.l1116
I know the one from the Fiero only has 3 ports, but could I just "T" my carb bowl vent and gas tank vent to the third port?