|
 |
|
|
|
>
Changing my AMC 20 rear axle....and if I used a Land Rover series III axle?
| Introducing MONSTALINER™ UV Permanent DIY Roll On Bed Line | TJ 5.25" Speaker Adapters - NalinMFG | Truck-Lite's New LED Headlamp Series |
 |
09-15-2007, 02:13 PM
|
#1 | |
|
Registered User
|
Changing my AMC 20 rear axle....and if I used a Land Rover series III axle?
Hi Guys,
I definitely need your advice. Here is my situation: I am going for bigger tires (at least 33"), and I also want to change my axles relation (3.3 actually). Some years ago, I had a Land Rover series III, for which I bought, and still have, the reinforced rear axle kit (reinforced axles and a Detroit Locker). The series relation is 4.7. The question is: do you know the width of the two piece axle shafts of the AMC 20? Do you know the width of the normal one-piece shafts that are sold with the upgrde kits? Putting Land Rover series axles will certainly improve the R&P relationship.....but if at the end it will result in weake shafts, I would prefer to save som extra money for the one-piece kits... Thanks for your help!! FrankCR
|
|
|
|
|
|
|
| Thread Tools | |
|
|
|
«
Previous Thread
|
Next Thread
»
|
| Suggested Threads |
|
 |
|
|
Jeep, Wrangler, Cherokee, Grand Cherokee, and other models are copyrighted and trademarked to Jeep/Chrysler Corporation. JeepForum.com is not in any way associated with Jeep or the Chrysler Corp.
|
