It is nice, and Matt was very honest with me. There are always issues though, especially since it only has 448 miles since it was reassembled. One rear axle seal is leaking. Worst problem so far is that I can move the output yoke from the D300 up/down/sideways about 1/8 of an inch. It's not the u-joint, it's the actual TC shaft moving. I am hoping the yoke wasn't torqued properly, I should have a new nut for it in a couple of days depending on the delivery man. Meanwhile I get to work on it instead of driving it.
Otherwise it seems that everywhere I look there are new parts, some of them are even tightened down! I gotta say having the Painless wiring harness in it is my favorite thing so far.