Originally Posted by BESRK
One suggestion.. when butting 2 tubes at an angle, split the angle between the 2 tubes.
For instance, let's say the angle needs to be 45deg. Cut each tube at 22.5deg and they'll butt up cleanly at a 45. That will allow you to weld around the whole tube to keep the joint closed so the tubes don't fill up with mud/debris.
tid bits like this is what made my nice *** bumper
'01 TJ 4.7/NV3550, 2" lift, 35's, locked.
'79 CJ7 stock, 304
'98 XJ sold
'79 CJ7 sold
'82 CJ7 parted
'89 MJ sold
SSG David Mejias, SSG Eric Vick, SGT William Bowling, SGT Robert McDowell
1 April 2007
Rest In Peace Brothers