Pics as requested...
You can tell the liner is smooth up under the pedals. The roller wouldn't get up there, but that's ok, I'm going for functionality not looks.
I decided to do the roll bar, and I'm glad I did. I like the way it looks against the red. If I change the color of my jeep I might regret it.
sanded, degreased, and wire brushed the rust away for prep.
2 coats of chassis saver (didn't even use a whole quart of the stuff) including the roll bar
Sheet metal and pop riveter. You can tell I did some work with the floor boards on the driver's side and on the passenger side as well. Hopefully the chassis saver works as advertised. I didn't cut all the rust out. Wasn't too much but a couple of pinhole spots where it got all the way through. wire brushed and applied liberally to top and bottom of rust. I'll keep my fingers crossed.
2 coats of Monstaliner =
Very Happy with how it turned out.