Installed my volant cold air intake. Question for everyone that has one. I think I'm missing a part because there's just a big empty hole at the bottom of my intake where water goes in. Is there a part for this?
Replaced all 16 plugs with Champion 570s and threw on Taylor shorties in red. Plugs were long overdue! Overall not bad, more of a pain in the *** than anything else. It took about 3 hours. I think I can shorten it to two for the next go around. Better than paying the dealer $480 though! Sent from my iPhone using JeepForum
I just did the same, new 570 Champions and Taylor Shorties #82241 Thundervolt 8.2mm. Didn't go to the dealer though, about $200, I supplied the wires and the shop, that does a lot of my work, supplied the plugs and a couple of litres of Amsol synthetic oil. Took a little over an hour to change plugs and wires.
Black WK #139
05 WK, 5.7 Hemi, 2" R.C. lift, 32s, K&N, MagnaFlow, 4xGuard Skids, Custom Rock Rails
This is right, but part number can change between red, blue, and black wires. They show up as for the Ram with a hemi on summit racing. Btw you only need the shorties if you have an 05-07 to get rid of the rats nest up on top. Sent from my iPhone using JeepForum
Just received my lift kit in the mail today from Kolak! Add that to my pile of things to do... Now, to decide if I want spacers or some other way to allow for a bigger tire without spacers... The threat about the spacer mishap has me second guessing getting them now.
2008 WK 3.7L V6 Dark Khaki Club Member #75 "Grizzly"
2001 WJ 4.7 V8 (Sold)
1998 ZJ 5.2L V8 (Dead @ 300,000 Miles)
Installed a pair of Kicker 41DSC354 3 1/2" speakers in the dash. I wanted to make the sound of the otherwise stock sounds system a little brighter and I accomplished that. I lost a little mid vocal but was able to compensate with the eq settings.