Picked these up off craigs list, 2012 Wrangler wheels. Wont be able to put them on for another couple weeks for a test fit. If its close i might try grinding down the caliper slightly to avoid using spacers. If not i might try and find some 3/4'' inch spacers
2007 WK Limited 4.7 -- 2" Daystar lift -- 265/70 General Grabber AT2 -- Superchip -- AFE CAI -- side stripe -- 08+ front end -- overland grill -- black vinyl pillars -- Fastman TB -- modified Rola roof rack - HIR 9012 low beams
I got them at 4wheelparts. They sell them individually or in a box pack, individually they are ~ $10 a piece, or you can get the box which has two small, 4 medium and 2 large for $30! Much better deal IMO.
I forgot to thank you! So, Thanks for the great idea!
No thanks needed brother
2006 Black wk overland HEMI QDII. OME HD bilstein struts with 58643 monroe load levelers RRO uca, afe cold air intake,hella 500FF behind grille, RC 1.5 wheel spacers s4xc cb antenna mount with 5ft firestik and midland 1001wx CB,265/70-17 falken rockymountain ats, pinch weld mod, door lock mod, Rola basket with 2 Hella 500 FF`s.
Also picked up a new PCV valve from the dealer, only cost $10 and made a BIG difference. No more shaky idle! Here is a pic of the old valve, 120K have taken their tole on it. I could barely get the inner valve to move.
I've been needing to do this as well. I only have 82,000 miles on mine, but I keep getting codes every once in a while saying it is the valve. I checked autozone and they said $35 which I thought was good, but maybe I'll need to go to the dealer instead!
i know the 4xguard website states that the rails for the matrix can be cut down for a more stubby customized look instead of being the whole width of the vehicle, but has anybody done this? I've never seen any pics on here that i can think of and i was wondering how it would look...
'05 GC 5.7L Hemi QDII...Rock Krawler lift, 4XGuard Matrix, rock sliders, front and rear skids, belly guard, rear diff guard, Bilstein HDs, Volant intake, 265/70 Goodyear DuraTracs, Superchips, Rola roof rack, BORA wheel spacers, Rocky Road Leveling Spacers, Magnaflow muffler, KC Slimlights, BT catch can, tb cover, and underhood kit, Expanded Sheet Metal Grille
Got my estimate back today... just over $3000 for repairs. Quote called for a new Laredo bumper & air-dam at just over $500.
Was thinking of just putting on an SRT-8 bumper on. I'm seeing SRT8 bumpers on Ebay for $400+ plus S&H. Was also kinda thinking of just going black with the bumper and grill. Then painting the forward facing flat parts on the quarter panels & hood a matching black too. Maybe taking the curved parts of the hood and paint them black and have them fade to grey as they get flat toward the windshield. Could be just crazy thinking too...