I was following the threads about oil leaking into the turbo so I thought I'd pull off my own intake tube and have a look.
Merlin had also said to replace the intake tube to turbo seal, part number 6420940080. So I ordered the part and when it came in I pulled off my intake tube, well to my surprise, my stock seal was damage, likely in the assembly process!
I installed the new seal, and I cleaned a bit of oil residue that was under the turbo.
There was some oil residue in the intake tube and front of the turbo, but that may have been there before I installed my oil separator, so I did wipe down of the areas and I will check it again the future.
Just thought I'd do this post so other can check their seals for leaks and replace as per Merlin's suggestion until the new intake tube is available.