Jeep Enthusiast Forums banner

ABS sensor trouble

717 views 2 replies 2 participants last post by  Jollyrogeruk 
#1 ·
Hi all, I am new to the forum and am a proud owner of a 2005 WK 3.0 CRD GC.
Ever since I purchased it some 4 years ago I have had intermittent problems with the traction control light randomly coming on and just lived with it. Sometimes the ABS light and traction control lights come on with the 'check 4WD system' and 'Electronic Braking system' messages.
Happy that this was an ABS sensor fault I replaced all of them a while back. The problem remained intermittent :(
Now the problem is permanent and won't clear. I think this is a wiring issue to the ABS sensors and I would like to trace the sensors cables back to the ABS control module.
The problem I have is that I don't know where to start :smile2:
Would anyone be able to share the sensors connections at the ABS module (PIN numbers) or a circuit.
Any help would be very much apreciated.

Thanks in advance
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top