TassieXJ say HI

[TassieXJ]

Hi all, Im Alan from Tasmania, Australia. Ive been looking at this site for some time now and decide it was time sign up.

I own a 1995 jeep cherokee sports.

My jeep is STD at the monemt expect for the 4.5" superflex lift kit, 30" tyres (way to small) and also on gas.

The jeep is on a three year project (which lm behind on) before on child starts school.

2007- still got to do the steering brace, 4 wheel disc brakes, rear driveshaft & SYE and shocks.

2008- Dual battery setup, rear drawer system, snorkel, exhaust 2 1/2", bonnet vents, bullbar, rearbar with tyre holder and bushwacker cut away flares.

2009- upgrade rear diff with either dana44 or super35 kit or maybe a nissan GQ, diff ratio and tyres 33-35".

[TassieXJ]

Here are some pictures of the lift (didnt take that many). The first picture is before the lift. Havent been able to test it out to much, due to the shock been to short and needs SYE and shaft (hopeful soon).











This is after the lift, a big different. It made the tyres look too small.

[TassieXJ]

Next l started was the rear drawers and cargo barrier. I didnt take to many photos of the build, but have to pull them apart to glue, so will take some then. Apart from that the only stuff left is the carpet and clean up to do.

[TassieXJ]

While l wait for the carpet, lve started the rearbar. Have lots of photos, but will only post a few to catch up.

This is the master plan (probable wont look anything like it).

[TassieXJ]

Started the tyre holder

[Haik]

Originally Posted by TassieXJ

Here are some pictures of the lift (didnt take that many). The first picture is before the lift. Havent been able to test it out to much, due to the shock been to short and needs SYE and shaft (hopeful soon).











This is after the lift, a big different. It made the tyres look too small.

clicky free

[Haik]

Originally Posted by TassieXJ

Next l started was the rear drawers and cargo barrier. I didnt take to many photos of the build, but have to pull them apart to glue, so will take some then. Apart from that the only stuff left is the carpet and clean up to do.

click free

[Haik]

Originally Posted by TassieXJ

While l wait for the carpet, lve started the rearbar. Have lots of photos, but will only post a few to catch up.

This is the master plan (probable wont look anything like it).

...click free...

[Haik]

Originally Posted by TassieXJ

Started the tyre holder

last clicky free... again, welcome to JF

[TassieXJ]

Thanks for that, how do you get the pictures up. With the other forums lm with, what l did worked. This site must be different.

[Lostj]

Welcome. nice jeep. thats the best looking tire carrier ive seen yet on a XJ

Originally Posted by TassieXJ

Thanks for that, how do you get the pictures up. With the other forums lm with, what l did worked. This site must be different.

you have to have a certain amount of posts to be able to post pictures. it keeps the trolls from posting pictrures

[rustywrangler]

Originally Posted by TassieXJ

Thanks for that, how do you get the pictures up. With the other forums lm with, what l did worked. This site must be different.

to the forum and that is one fine looking XJ you got there. Very nice fab skills as well.


On Jeepforum, you need to be a member for 30 days and have 50 Tech posts to post pics that show up. THey will work just the way you posted them on other sites once you reach those two goals.

[TassieXJ]

Thanks for the comments

[TassieXJ]

Got my bonnet vents today and made a template for them, hopeful put them one this weekend. My girlfriend getting worried about me cutting holes in the bonnet.

[TassieXJ]

This is what it should look like when finish, not sure to leave black or paint them red.



Started the marking (got from go jeeps site).





Then the cutting with a 4" grinder Then paint to stop rusting.







Then putting the vents on.