Tube Fenders that get tied into the sliders

cwood34 · 03-23-2008, 07:45 PM

Anyone got any pics with their tube fenders tying directly into the sliders?

**JBWood05TJ** · 03-23-2008, 08:51 PM

The last bolt on the forward end of my A to Z Rockers goeas through the flat panel of my Gen-Right Tube Fenders. Is this what you meant?

cwood34 · 03-23-2008, 10:41 PM

thats good, but i'm looking more for a fab job that has one piece of tubbing that runs through the fenders and is used as rails for the sliders...

.Jch. · 03-23-2008, 10:50 PM

so you want it to just be one piece? Like the tube of the fender to come straight down and run across the as the bar of the rocker guard? Can't say I've ever seen that, would probably have to be a custom job.

**JBWood05TJ** · 03-24-2008, 09:03 PM

Yeah, I've not ever seen that either. Not even sure if it's a good idea. Have to mull that one over...

JEEP97TJ · 03-24-2008, 09:40 PM

Quote:

Originally Posted by cwood34

Anyone got any pics with their tube fenders tying directly into the sliders?

I know what you are talking about, but don't remember where I have seen pictures like that.

TXST8tj · 03-25-2008, 03:00 PM

the problem with doing something like that is you would have to cut the tube or remove the entire fender and rocker guard if you ever needed to remove the fenders.

B-Well · 03-30-2008, 08:53 PM

Quote:

Originally Posted by TXST8tj

the problem with doing something like that is you would have to cut the tube or remove the entire fender and rocker guard if you ever needed to remove the fenders.

Also, if you mangle either you'd have to cut/weld to replace the parts. Unless of corse you want that perminent hardcore look.

dawnskaybug · 03-31-2008, 12:26 AM

Pix taken Saturday

creepycrawly · 03-31-2008, 07:43 PM

I know where there is one at that has what you are asking for. It is a complete custom job, but I can swing by and take some pictures if you would like.