|
 |
|
|
|
01-25-2008, 08:22 PM
|
#1 | |
|
Registered User
|
Wiper Linkage (New FSJ to me!!)
Ok, so I've got an 88 GW with a wiper issue. First off, I replaced the motor because the gears were stripped but I got to looking into the problem and found that there was a REASON for that! With the linkage disconnected from the motor, I can only move the wipers about halfway through their path. How the hell do I get behind the dash to find out what's wrong? I pulled the stereo out - I can see the passenger side linkage but cannot touch it. Any ideas?? This dash looks like a PITA to get apart!! Thanks ahead of time!
BTW - Pic of my new toy. 
__________________
85 CJ7 - 360, 5 Speed, Dana 300, Hardtop, full doors, white over rust...lots of it! 85 XJ TurboDiesel. 2.1l Renault engine, 4dr, 4x4, 5speed. It's rather embarassing to look at, but I still can't sell it...too weird. My pulling machine: 07.5 Silverado 2500HD, Duramax/Allison, LTZ...Red/Black |
|
|
|
|
|
|
02-05-2008, 05:00 PM
|
#2 |
|
Registered User
1984 J-Series Truck
|
I had to take apart the glovebox and 1/2 the AC to get into mine. Before you do that. see if the wipers are both going the same direction when you move the arm. I had one where the arm flipped on one side and it locked but the wipers tried to swing inwards at the same time! I had to force the pass side arm back over center with the driver's side arm off so it wouldn't hit the edge of the glass.
|
|
|
|
 |
| Thread Tools | |
|
|
|
«
Previous Thread
|
Next Thread
»
|
| Suggested Threads |
|
 |
|
|
Jeep, Wrangler, Cherokee, Grand Cherokee, and other models are copyrighted and trademarked to Jeep/Chrysler Corporation. JeepForum.com is not in any way associated with Jeep or the Chrysler Corp.
|
