Got Laid off Monday- Time to hop up the 360!!! - JeepForum.com
Reply
 
LinkBack Thread Tools
post #1 of 43 Old 04-19-2013, 02:28 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
Got Laid off Monday- Time to hop up the 360!!!

So here is the parts list I ordered today.
I have an HP Holley 750 sitting new in the box. Going with the stupid big cam 8601, springs, retainers, going to yank and cleanup the heads, lap the valves and do the seals while im in there. Perf RPM intake. Similar cam grind and intake etc that i have on my 442 olds 358 which makes over 400ft/lbs by 2k so yah i have heard all about how the cam will be too big etc. It wont when setup right. 3.31 gears. I will add a 2400 stall with a 4L80 once I land the new gig. I will roast these 31's for a 1/2 a block from a dead stop.

Purchased Items
Part # Item Status Price Qty Line Total

CCA-159
COMP Cams 159 - COMP Cams Engine Break-In Oil Additive

Shipping restrictions may apply on this part.

If you purchase this part, your order can only be shipped by ground.

Ready to Ship

$10.95

2

$21.90

CCA-4753
COMP Cams 4753 - COMP Cams Valve Spring Shims

Ready to Ship

$19.95

1

$19.95

CRN-99839-16
Crane Cams 99839-16 - Crane Single Valve Springs

Ready to Ship

$88.00

1

$88.00

CRN-99957-16
Crane Cams 99957-16 - Crane Steel Valve Spring Retainers

Ready to Ship

$63.20

1

$63.20

EDL-7213
Edelbrock 7213 - Edelbrock Intake Manifold Gaskets

Ready to Ship

$13.95

1

$13.95

EDL-7530
Edelbrock 7530 - Edelbrock Performer RPM Air-Gap Intake Manifolds

Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Ready to Ship

$299.95

1

$299.95

EDL-8534
Edelbrock 8534 - Edelbrock Intake Manifold Bolt Kits

Ready to Ship

$16.95

1

$16.95

FEL-TCS45003
Fel-Pro QTCS45003 - Fel-Pro Timing Cover Gaskets

Ready to Ship

$15.95

1

$15.95

MOR-62388
Moroso 62388 - Moroso Valve Seat Pressure Testers

Ready to Ship

$115.95

1

$115.95

SUM-K8601
Summit Racing SUM-K8601 - Summit Racing® Cam and Lifter Kits



$102.95

1

$102.95
Part Subtotal $758.75
Order Subtotal $758.75
Ending Balance $758.75


www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
Sponsored Links
Advertisement
 
post #2 of 43 Old 04-19-2013, 02:30 PM
XtrailratedJ
Registered User
1996 XJ Cherokee 
 
Join Date: Apr 2008
Location: Tampa, FL
Posts: 951
Ahh...Retail therapy, always makes my wife feel good too.

96 XJ 4.0L/AX15/NP231/AUSSIE'D D30/C8.25/4.5" RE LIFT/33'S/BUMPERS, SLIDERS, ETC...
"I pitty the fool who lists D30's and 31's, then tries to talk **** on PBB":

Originally Posted by Durt_Diver:
Those pics might be a little too flexy for this thread. You don't happen to have any pics of your friends xj on a curb by chance?
XtrailratedJ is offline  
post #3 of 43 Old 04-19-2013, 02:43 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
except we spend it on much more tangible things... like how to lower our gas mileage!!! ROFL

www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
post #4 of 43 Old 04-19-2013, 05:53 PM
RockRollin
Registered User
1990 FSJ Wagoneer 
 
Join Date: Apr 2012
Location: Grand Haven Mi
Posts: 1,325
Sorry to hear about the lay off Super, but it looks like your adjusting well
That's a lot o cam, are you going to use the stock exhaust manifolds. My waggy after the cam still wouldn't spin a tire with the bumper against a tree. After the Holley/ Edel 2150, I have to feather the throttle at the lights, and it pulls hard all the way up to some unknown rpm. I don't see a t-chain on the list

That should be Edel 2131 intake, 2150 is history

"I like fun" Edd
Clawed: 90GW, TFI, Streetfire, 3"lift all spring, 31"BFG ATs, working RKE, Edel2131, Holly 1850, mild cam,
05 Renegade OME 927, 947, top plate, JBA 4.5s
"Just Jeepin it real"
RockRollin is offline  
post #5 of 43 Old 04-19-2013, 07:03 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
T chain and gears on list

www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
post #6 of 43 Old 04-19-2013, 10:32 PM
revelc
Registered User
1985 FSJ Wagoneer 
 
Join Date: Nov 2011
Location: Tyler
Posts: 662
hijacking.
Does anyone know what problems would arise with lift over.5?
What are the limits?
I want to run the Big Voodoo cam but have heard mixed things about head work.

Wag Rebuilt 360, 260H, 727, Locked 44, AMC 20, 208, 31" M/T's, 4" Rustys, 2.5" Duals. SOON:SOA SF, 496, T400, Doubler, D60's, 37" M/T's <-TOY
Cherokee Rebuilt 360, 2" Duals, mostly stock. SOON: Hot Street 401, 4'' Rustys, 33" BFG A/T's maybe a T-case to get rid of Q-Track <-TOW RIG
revelc is offline  
post #7 of 43 Old 04-20-2013, 09:37 AM
RockRollin
Registered User
1990 FSJ Wagoneer 
 
Join Date: Apr 2012
Location: Grand Haven Mi
Posts: 1,325
Quote:
Originally Posted by revelc View Post
hijacking.
Does anyone know what problems would arise with lift over.5?
What are the limits?
I want to run the Big Voodoo cam but have heard mixed things about head work.
Limits are what the heads are set up for. Try here
http://www.bulltear.com/forums/forum...hp?102-Engines
That'll hold ya for a while
OK so nevermind I just spotted your user name.

"I like fun" Edd
Clawed: 90GW, TFI, Streetfire, 3"lift all spring, 31"BFG ATs, working RKE, Edel2131, Holly 1850, mild cam,
05 Renegade OME 927, 947, top plate, JBA 4.5s
"Just Jeepin it real"
RockRollin is offline  
post #8 of 43 Old 04-20-2013, 08:46 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
crap it does look like my t chain fell off the list. Ordering that now plus some valve covers.

www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
post #9 of 43 Old 04-21-2013, 09:10 AM
revelc
Registered User
1985 FSJ Wagoneer 
 
Join Date: Nov 2011
Location: Tyler
Posts: 662
Quote:
Originally Posted by RockRollin

Limits are what the heads are set up for. Try here
http://www.bulltear.com/forums/forum...hp?102-Engines
That'll hold ya for a while
OK so nevermind I just spotted your user name.
That forum hasn't been active in a while

Wag Rebuilt 360, 260H, 727, Locked 44, AMC 20, 208, 31" M/T's, 4" Rustys, 2.5" Duals. SOON:SOA SF, 496, T400, Doubler, D60's, 37" M/T's <-TOY
Cherokee Rebuilt 360, 2" Duals, mostly stock. SOON: Hot Street 401, 4'' Rustys, 33" BFG A/T's maybe a T-case to get rid of Q-Track <-TOW RIG
revelc is offline  
post #10 of 43 Old 04-21-2013, 06:25 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
Rock, on your 90 where does your factory temp guage sit normally? Mine rides just above the blue zone. After 40 min in hwy it will rise up about one more needles width above that. I have a 185 stat. Factory fan new clutch and factory.radiator but its also new. I need to find that air dam for under the bumper. Planning on adding my dual electrics when I redo the top end

www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
post #11 of 43 Old 04-21-2013, 07:30 PM
RockRollin
Registered User
1990 FSJ Wagoneer 
 
Join Date: Apr 2012
Location: Grand Haven Mi
Posts: 1,325
I can see a sliver of black between the needle and the white line that borders the blue. I'm guessing that's 185-190, that is what the IR guage reads as well, +/- 3º. If I'm crusin at 70-75, I go up a needle width also, so I'm thinking that's normal. Before the air dam it was climbing to the center mark at 60, and above that at higher speeds. I was running a half-0-shroud, but one wrong palm placement got rid of that. It didn't make any difference to the cooling that I can tell.

"I like fun" Edd
Clawed: 90GW, TFI, Streetfire, 3"lift all spring, 31"BFG ATs, working RKE, Edel2131, Holly 1850, mild cam,
05 Renegade OME 927, 947, top plate, JBA 4.5s
"Just Jeepin it real"
RockRollin is offline  
post #12 of 43 Old 04-21-2013, 07:32 PM
revelc
Registered User
1985 FSJ Wagoneer 
 
Join Date: Nov 2011
Location: Tyler
Posts: 662
Quote:
Originally Posted by super98lsc
Rock, on your 90 where does your factory temp guage sit normally? Mine rides just above the blue zone. After 40 min in hwy it will rise up about one more needles width above that. I have a 185 stat. Factory fan new clutch and factory.radiator but its also new. I need to find that air dam for under the bumper. Planning on adding my dual electrics when I redo the top end


image-3590529545.jpg

Mine never budged running between 70-85 870 miles back to Texas. 401 .030 over. Summit universal Aluminum radiator, Milidon high flow water pump, 160* thermostat, 91 GW w/ac HD fan clutch, no shroud, stock fan, bumper gum shroud.

Wag Rebuilt 360, 260H, 727, Locked 44, AMC 20, 208, 31" M/T's, 4" Rustys, 2.5" Duals. SOON:SOA SF, 496, T400, Doubler, D60's, 37" M/T's <-TOY
Cherokee Rebuilt 360, 2" Duals, mostly stock. SOON: Hot Street 401, 4'' Rustys, 33" BFG A/T's maybe a T-case to get rid of Q-Track <-TOW RIG
revelc is offline  
post #13 of 43 Old 04-21-2013, 08:26 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
I want round gauges!! They just look do much cleaner

www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
post #14 of 43 Old 04-23-2013, 03:01 PM Thread Starter
super98lsc
Web Wheeler
1999 WJ 
 
Join Date: May 2006
Location: Austin
Posts: 1,415
Well most the parts arrived today. timing set and valve covers arrive tomorrow. Going to find out how much it will cost me to have both heads pressure checked and valves done tomorrow. I plan to port them some while off, raise roofs, cleanup transistions remove flash and gasket match. does anyone know if the 200 dollar headman headers clear on a driver drop rig? Im on a 4" lift

www.mangierisrc.com
06-Corvette z51-6spd,b&b,K&N low miles.
77-Corvette Stingray 496 BBC/TH400 built 667hp+
===================================
00 WJ 4x4, 4.7 stroker, turbocharged,..lots more..
01 WJ 4x2 4.7v8 Limited (needs valve job)
90 Grand Wagoneer 401 Edelbrock Heads, Lunati .510/.527 FT Cam, Edelbrock RPM Air Gap, Holley HP 750, Thorley Headers, HEI, Electric Fan w Digital controller,4" lift 31x10.50 Goodyear Duratrac's on Pro-Comp Wheels,new interior, seats,seals,Alpine and JL full system, Remote HEI, Clifford 2 way with remote start,windows,tailgate.
96 Cherokee Country 4dr/2x2 White/Tan 3" Lift Sahara 18" Wheels 32.5"'s 99up head and intake- for sale soon!
super98lsc is offline  
post #15 of 43 Old 04-23-2013, 05:24 PM
revelc
Registered User
1985 FSJ Wagoneer 
 
Join Date: Nov 2011
Location: Tyler
Posts: 662
Quote:
Originally Posted by super98lsc
Well most the parts arrived today. timing set and valve covers arrive tomorrow. Going to find out how much it will cost me to have both heads pressure checked and valves done tomorrow. I plan to port them some while off, raise roofs, cleanup transistions remove flash and gasket match. does anyone know if the 200 dollar headman headers clear on a driver drop rig? Im on a 4" lift
Unfortunately I haven't heard anything good about cheap headers. The people that have made them work had to mess with them. Like cutting the flanges between each port, cutting grooves around each port, or just throwing them out and getting Doug's.

As far as fitment I am not sure.

I am about to learn how to port and do a valve job myself. I am excited to learn about this stuff

Wag Rebuilt 360, 260H, 727, Locked 44, AMC 20, 208, 31" M/T's, 4" Rustys, 2.5" Duals. SOON:SOA SF, 496, T400, Doubler, D60's, 37" M/T's <-TOY
Cherokee Rebuilt 360, 2" Duals, mostly stock. SOON: Hot Street 401, 4'' Rustys, 33" BFG A/T's maybe a T-case to get rid of Q-Track <-TOW RIG
revelc is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome