Truck-Lite 7" Round LED Headlamp Kit (Pair) - Clear, 55-14 Jeep, Wrangler TJ/JK/Unilimited JK/CJ-5/CJ-7/CJ-8
To order go to: http://www.vertical4.com/truck-lite-...cj-7-cj-8.html
This light utilizes a completely new light delivery method, adopting parabolic reflector technology to create a smooth, even light output. The use of metalized reflector optics provides a clean and homogeneous spread of light, more uniform than other options, without any targeted or focused beams or projector-type color artifacts. Truck-Lite Used the latest in computer-assisted optics design software to create a reflector-based system that provides an optimum lighting pattern. Essentially increasing visibility to the driver, while minimizing glare to oncoming traffic, providing illumination that's safer to everyone on the road.
The lamp is designed with Omni-Volt® technology to accommodate both 12 and 24 volt headlamp applications, providing crisper and whiter light output than halogen alternatives, while extending product life and adding greater dependability. The maintenance-free lamp uses a solid-state, bulb-free system that's impervious to damage caused by shock and vibration, with a military grade, die-cast aluminum housing, non-yellowing polycarbonate lens and a scratch-resistant hard coating to protect against damage from impact, roadside debris and other hazards. Advanced LED technology has significantly reduced LED headlamp current draw compared to halogen products, to 3.6a high beam and 1.8a low beam, allowing more power for other vehicle requirements & extending alternator life.
When properly mounted, exceeds FMVSS-108 and CMVSS-108 DOT requirements for low beam and high beam performance. Metalized reflector optics provide a lighting experience that smooth and clean across the driving surface Provides a brighter, crisper, and whiter light output, closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility.
Durability and dependability of LED lighting provides a solid-state, bulb-free headlamp design that is impervious to damage from shock and vibration
Military grade, die-cast aluminum housing and non-yellowing, polycarbonate lens offer optimum protection against damage from impact, roadside debris and other hazards. Electronics are sealed in epoxy to resist from damage caused by corrosion or moisture. Advanced circuitry protects against voltage spikes up to 600v. Drop-in replacement for #6014, 6015, 6016, H6024 and Par 56 headlamp designs. Uses standard, H4, 3-blade wiring connector
Equipped with Truck-Lite 3-Year Limited Warranty. COMES WITH H4 to H13 adapter.
Hard-coated polycarbonate lens
eCoat aluminum housing and internal structures
16 Gauge Wire
2 LED Arrays
9v-33v Multi-volt design works with both
12v and 24v systems
12.8v, 1.80a (low beam), 3.60 amps (high beam)
25.6v, 1.00a (low beam), 1.80 amps (high beam)
Operating temperature range: -40?C to 50?C
Overvoltage protection to 600v, w/constant output
Please direct any questions about ordering to Josh at firstname.lastname@example.org