Santa Kolak Announces: Kolak Exhausts 20% off sale! - JeepForum.com

Reply
 
LinkBack Thread Tools
post #1 of 37 Old 11-30-2010, 10:26 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
Santa Kolak Announces: Kolak Exhausts 20% off sale!

Christmas is fast approaching and Santa Kolak has been pondering what to put on special for the holidays. Last year's "power buy of my Kolak Exhausts was so successful, I've decided to repeat it for this Christmas season.

I've been offering custom exhausts for the Jeep ZJ, WJ, XJ, and TJ for 14 years now as I'm sure many of you know. Thousands of Jeepers all over planet earth are using my exhausts on their Jeeps, and this will be a great opportunity to join the crowd and save a bundle.

For this sale I'm offering fully 20% off my regular prices. So you'll save upwards of $75.00! I've held the line on pricing all year long, so if you missed out on last year's sale you won't pay a penny more.

The most obvious benefit of a properly constructed free-flowing exhaust is more power and of course a healthy exhaust note. You'll also be pleased to know that fuel economy gains are also significant - I've received endless reports over the years of gains from 1 mpg to as much as 2.5mpg.

All of my exhausts follow a very important methodology:


1) The stock tubing size is increased to what is correct for the engine displacement. In the case of the 4.0 I6, the correct diameter is 2.5". For the 4.7, 5.2, and 5.9 V8 engines, 3" diameter is best for maximum power and efficiency.

2) The main catalytic converter is replaced with a high flow unit. The typical stock Jeep converter flows just 270 cfm. My recommended Magnaflow high flow converters flow 425-450 cfm depending on inlet/outlet diameter. These are the highest flowing ceramic converters on the market, the winners of the Hot Rod magazine converter shootout test.

3) The muffler is replaced with a free-flowing unit. Here I recommend Flowmaster mufflers, specifically the 3-chamber design. These have no rpm sensitive drone or resonance.

4) Last up is the tailpipe. Here I have my custom Kolak Performance mandrel bent tailpipes. Mandrel bending allows tight radius bends with no restriction.


I have setups available for the WJ, ZJ, XJ, and TJ. Just send me a PM with your email address and vehicle information and I'll send you detailed information and pricing.


Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
Sponsored Links
Advertisement
 
post #2 of 37 Old 11-30-2010, 10:38 PM
RedZJ
Registered User
1996 XJ Cherokee 
 
Join Date: Jun 2008
Location: Jackson
Posts: 3,095
Garage
pm sent
RedZJ is offline  
post #3 of 37 Old 12-01-2010, 04:43 PM
Unlimited04
This post/info=my opinion
 
Unlimited04's Avatar
2004 LJ Wrangler 
 
Join Date: Dec 2005
Location: Colorado
Posts: 24,178
Unlimited04 is offline  
post #4 of 37 Old 12-01-2010, 04:59 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
Unfortunately I don't make a mandrel bent tailpipe for the LJ, but thank you for asking.

Quote:
Originally Posted by Unlimited04 View Post
pics? shipping? LJ's?

Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
post #5 of 37 Old 12-01-2010, 05:34 PM
kuruma
Registered User
2006 LJ Wrangler 
 
Join Date: Jun 2010
Location: San Diego
Posts: 635
Quote:
Originally Posted by Kolak View Post
Unfortunately I don't make a mandrel bent tailpipe for the LJ, but thank you for asking.
So is one going to be in the works? Do you need an LJ??? I'm in Yuma.
kuruma is offline  
post #6 of 37 Old 12-01-2010, 05:41 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
If I could get 5 or so LJ customers I could justify making a batch of tailpipes. I'd just get a stock tailpipe and use it as a pattern for the larger diameter 2.5" tailpipe.

Quote:
Originally Posted by kuruma View Post
So is one going to be in the works? Do you need an LJ??? I'm in Yuma.

Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
post #7 of 37 Old 12-01-2010, 07:08 PM
04ovrland
Registered User
2004 WJ 
 
Join Date: Oct 2009
Location: Meredith
Posts: 246
i have the factory precats on my WJ with no main cat from the factory. do you still suggest the highflow or not?

2004 Overland WJ 4.7ho/545rfe/247/d44a
04ovrland is offline  
post #8 of 37 Old 12-01-2010, 07:43 PM
Unlimited04
This post/info=my opinion
 
Unlimited04's Avatar
2004 LJ Wrangler 
 
Join Date: Dec 2005
Location: Colorado
Posts: 24,178
Quote:
Originally Posted by Kolak View Post
Unfortunately I don't make a mandrel bent tailpipe for the LJ, but thank you for asking.
well i'm not going to Phoenix area anytime soon...so out of curiosity, what Flowmaster model (or other muffler) do you like for a rather quiet exhaust...good note, but not much louder than stock, but smaller size than stock. Flowmaster 50 series?

I hate waking up @ 6am @ a campsite to some redneck romping on the throttle/exhaust on a trail.

My first vehicle had a SBC 350 w/ 4-barrel & RV cam, full length ceramic headers, no cats & true dual Borla's...so I don't expect the 4.0L to sound like anything other than an 8N tractor.

Unlimited04 is offline  
post #9 of 37 Old 12-01-2010, 07:53 PM
MrBaz
Registered User
 
Join Date: Dec 2007
Location: Colorado
Posts: 66
dot foldered for easy reference later.

2004 Charcoal Limited, 4.7L H.O., QuadraDrive, Nav
MrBaz is offline  
post #10 of 37 Old 12-01-2010, 09:19 PM
JKDinSC
Registered User
1997 ZJ 
 
Join Date: Apr 2010
Location: South Carolina
Posts: 136
when does this sale end and what is your price for a 4.0 zj exhaust shipped to 29445
JKDinSC is offline  
post #11 of 37 Old 12-01-2010, 10:00 PM
austinaubinoe
Registered User
2000 XJ Cherokee 
 
Join Date: Jan 2009
Location: Maryland
Posts: 1,231
do you not have a website?
austinaubinoe is offline  
post #12 of 37 Old 12-01-2010, 10:06 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
I have a specific setup with a resonator for the late style 2004 WJ V8. Send me a PM with your email address for all the information.

Quote:
Originally Posted by 04ovrland View Post
i have the factory precats on my WJ with no main cat from the factory. do you still suggest the highflow or not?

Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
post #13 of 37 Old 12-01-2010, 10:07 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
The sale ends on December 31st. Please PM me your email address and I'll send you all the information and pricing.

Quote:
Originally Posted by JKDinSC View Post
when does this sale end and what is your price for a 4.0 zj exhaust shipped to 29445

Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
post #14 of 37 Old 12-01-2010, 10:08 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
The Flowmaster 70 sounds great with the 4.0. No drone or resonance, and the most V8-like sound.

Quote:
Originally Posted by Unlimited04 View Post
well i'm not going to Phoenix area anytime soon...so out of curiosity, what Flowmaster model (or other muffler) do you like for a rather quiet exhaust...good note, but not much louder than stock, but smaller size than stock. Flowmaster 50 series?

I hate waking up @ 6am @ a campsite to some redneck romping on the throttle/exhaust on a trail.

My first vehicle had a SBC 350 w/ 4-barrel & RV cam, full length ceramic headers, no cats & true dual Borla's...so I don't expect the 4.0L to sound like anything other than an 8N tractor.


Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
post #15 of 37 Old 12-01-2010, 10:09 PM Thread Starter
Kolak
Vendor
 
Kolak's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 6,314
Not yet - one of these years I promise I keep saying that next year will be the year I finally set up a web site but I'm so inundated with emails and PMs every day that I never can find the time.

Quote:
Originally Posted by austinaubinoe View Post
do you not have a website?

Kolak Performance and Offroad
Member: Specialty Equipment Market Association
Telephone: 480 998-3661
kolak@aol.com or kolak@kolakperformance.com
Kolak is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
Santa Kolak Presents: Kolak Exhausts 20% off sale! Kolak Vendor Display 14 12-25-2009 08:39 PM

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome