At Ruffstuff we've Lowered Diff Cover Prices!

[Gravel Maker]

Same great 3/8" thick covers but with the recent drop in steel prices we were able to lower our Diff Cover prices by $10 across the board!

They used to be a great value for around $10 more than the rest you got a cover 50% thicker, now for about the same price you get a stronger cover!

And you can still take the discount too and get much more for much less :smokin:

Still 3/8" thick, still welded inside & out, still machined Flat after welding! These features alone make these the best made but if your mind isn't made up just ask your friends!







Thanks for your continued patronage and we will continue our efforts to bring you fair prices!

[Gravel Maker]

Bump for the best!

[Gravel Maker]

80 degrees and clear! But the phone is ringing off the hook, good thing I have a laptop so I can work outside!

[dcorn]

Just wanted to post this to show how many times my Ruff Stuff D30 cover saved me at Rausch Creek. I landed square on it at least 20 times over two days. You can see the sharp bottom edge is now rounded and the 3 lower bolt heads are pretty mangled as well, but the cover didn't budge or bend at all. I might have to seal up the drain plug permanently because it seems to have taken a few direct hits. Still, the stock cover would have been in multiple pieces after some of those hits. Props to these guys for making awesome covers!

[Gravel Maker]

Originally Posted by dcorn

Just wanted to post this to show how many times my Ruff Stuff D30 cover saved me at Rausch Creek. I landed square on it at least 20 times over two days. You can see the sharp bottom edge is now rounded and the 3 lower bolt heads are pretty mangled as well, but the cover didn't budge or bend at all. I might have to seal up the drain plug permanently because it seems to have taken a few direct hits. Still, the stock cover would have been in multiple pieces after some of those hits. Props to these guys for making awesome covers!

To keep a good seal on the DP be sure and not tighten it too much or the rubber will tear. About 1/2 turn past finger tight. Try some teflon tape on the fill plug and it seals up tight...

[dcorn]

Originally Posted by Gravel Maker

To keep a good seal on the DP be sure and not tighten it too much or the rubber will tear. About 1/2 turn past finger tight. Try some teflon tape on the fill plug and it seals up tight...

Yeah, I've been meaning to teflon the fill plug. I'll try replacing the drain plug with one of the extras you sent; It wasn't leaking before I went through the rocks lol. I think I still have them around. T

[Gravel Maker]

Originally Posted by dcorn

Yeah, I've been meaning to teflon the fill plug. I'll try replacing the drain plug with one of the extras you sent; It wasn't leaking before I went through the rocks lol. I think I still have them around. T

And I will send some more.....

[dcorn]

Thanks! You guys rock, I've made sure to recommend your covers everytime someone talks about skids or rock protection

[Gravel Maker]

Originally Posted by dcorn

Thanks! You guys rock, I've made sure to recommend your covers everytime someone talks about skids or rock protection

Thats always the best kind of advertising!

[Gravel Maker]

It will come back over time or civilization as we know it will end Oh well, life goes on and if civilization is coming to an end what better time to get your rig ready

And if it costs' 10% less by using the JPFORM discount code you don't need a never ending pretend sale either!

[Gravel Maker]

But you still get 10% off at Ruffstuff!

[Gravel Maker]

Why would a company be increasing prices at this point in time?

We have just lowered prices! We have seen a very large decrease in steel prices over the last 3 months and if companies should be moving prices they should be going down!

[Gravel Maker]

For you to ask for one!

[MuddyJeepZJ]

Your posts always make me scratch my head then I realize that you add the bold part as well.

[NDAWIND]

sent you a pm regarding my order