JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   Vendor Display (http://www.jeepforum.com/forum/f43/)
-   -   ROGUE FAB Tubing Bender with choice of 180 degree die set - only $595! (http://www.jeepforum.com/forum/f43/rogue-fab-tubing-bender-choice-180-degree-die-set-only-595-a-1418996/)

RogueFab 09-19-2012 01:49 PM

ROGUE FAB Tubing Bender with choice of 180 degree die set - only $595!
 
http://i7.photobucket.com/albums/y25...rightsmall.jpg


The Rogue Alpha Tube Bender kit w/dies is only $595($580 check/cash)
Shipping is $55-$95 in the lower 48, but we ship worldwide
All you need to add is the air/hydraulic cylinder ($72 at harbor freight, or we can ship you one)



180 degree Die sets in 3.5"-4.5" CLR are $199 shipped, no sale required... this is every day:
1.75"x4.5"CLR (bends .120 to .188 DOM, .250 wall with HD kit)
1.625"x4.5"CLR (bends .120 to .188 DOM, .250 wall with HD kit)
1.50"x4.5"CLR (bends .095 to .188 DOM, .250 wall with HD kit)
1.00"x4.5"CLR (bends .058+ DOM)
1.00 Square x4.5" CLR (bends .095-.125)
1.25 Square x4.5" CLR (bends .095-.120)
1.25"x4.5"CLR (bends .065+ DOM)
1.66"x4.5"CLR (1.25 sch40 pipe)
.500 round and square on one die (3.5 CLR)
.750/.875 round on one die (3.5 CLR)


180 degree Die sets in 5.625"-6.00" CLR are $349 shipped:
1.75"x6.00"CLR (bends .095 to .188 DOM, .250 wall with HD kit)
1.625"x6.00" CLR (bends .083 to .188 DOM, .250 wall with HD kit)
1.50"x5.625"CLR (bends .078 to .250 DOM)
1.50"x6.00"CLR (bends .078 to .250 DOM)


180 degree Die sets in 2.00 tube diameter are $399 shipped:
2.00"x6.00"CLR (bends .120 DOM, comes with HD kit)


Finally there is an affordable solution to bending tube without mounting the bender the ground, buying adapter kits for hydraulic cylinders, or requiring you to rip on a 4 foot bar while you try to read a degree wheel you can’t even reach. Our kit comes with EVERYTHING you need except the hydraulic cylinder, which is available nearly everywhere (without paying shipping). Our Rogue Alpha Bender bends vertically to save space in your shop. It can bend the first 90 degrees without pulling any pins or using any ratchet mechanism (then you re-pin to bend more). It doesn’t need to be mounted to the ground, making it portable. It can be operated by hand (hydraulically), or by power (air compressor). This tool is Made in the U.S.A. out of US made metal/materials and packaged in US made boxes.

We just redesigned our bender, now it bends 96 degrees in a single ram stroke with 3.5 or 4.5 CLR dies!!!

What’s Included:
• 180 degree 4.5" CLR die set (you choose the size)
• Degree wheel/pointer
• Base and all necessary parts/hardware
• Printed instructions

What you need:
• $72 HF Air/Hydro Cylinder ($90 w/o 20% off coupon)
• Welder to assemble base
• Can of spray paint to make 'er pretty

Most orders are still out the door within 48 hours!!!


click here to see a YouTube Video of the tool in action!

Click here to go to our website (and online store)

http://i7.photobucket.com/albums/y25...ps1766f529.jpg

http://i7.photobucket.com/albums/y25...y/P5191214.jpg

http://i7.photobucket.com/albums/y25...cabby/1751.jpg

RogueFab 09-24-2012 09:26 AM

Pic below showing bent 1.75x.188 1020 DOM. If you want to build rocker guards with rock sliders, tube fenders, bumpers, or a custom cage... this machine can handle it all!

http://i7.photobucket.com/albums/y25...y/IMG_0624.jpg

RogueFab 10-02-2012 09:18 AM

We just finished testing of our 1.00" Square die set, and it is added to our web page. This was a customer request (several) and we responded and made it.

http://i7.photobucket.com/albums/y256/turbocabby/33.jpg

RogueFab 10-09-2012 05:29 PM

Big change to the website this week (behind the scenes). We now have a dynamic shipping calculator. No more relying on Paypal to try to get close on shipping. Accurate UPS shipping quotes will take you 2 clicks and 5 keystrokes! We don't need you to make an account and tell us your full address, credit card number, interests and blood type to get a quote!

It's that easy:

-Add to cart
-Type in zip code
-Click continue

And the shipping is displayed.

Of course if you would rather post up your city or zip and what you want, we will be more than happy to shoot you a quote via PM too :D

fratis 10-10-2012 05:21 PM

how is this design better then a protools horizontal unit?

RogueFab 10-15-2012 04:22 PM

Quote:

Originally Posted by fratis (Post 14282712)
how is this design better then a protools horizontal unit?

Sorry for the delayed response, we need to change something in our subscription settings.

If you are asking, I am guessing you have already compared the prices for a bender, a couple of die sets, a degree wheel, and a base, and a handle or hydraulic conversion kit all shipped to your zip code (compared to our bender, which comes with everything you need except the ram). This is where you will see the biggest difference; our design can be made for much less without giving up features or functions.

The common Hossfeld style horizontal bender design that nearly every manual bender uses (JD, Pro Tools, etc) is a good proven design. It is an old design, and it was intended for manual operation. Here is a quick comparison.

Hossfeld Style
Drawbacks:
  • They have to be bolted to the ground
  • They are manual (and conversions don’t typically put the ram in line with the pivots)
  • When converted to hydraulic they still need to have a custom base made or be floor mounted
  • They use dies that have a weldment at the highest stress area
  • Horizontal bending long material without a way to rotate the bender requires a MASSIVE amount of open space
  • Dies cost much more

Advantages:
  • Flexibility of die options (CLR, spacing, etc)
  • Proven over the years (why else would everyone use this design?)

Rogue Design:
Advantages:
  • They DON’t have to be bolted to the ground
  • They are manual hydraulic or air/hydraulic, or convertible to electric hydraulic!
  • No additional parts or money to convert to hydraulic, we make them that way
  • Our dies are cut from 100% billet material. No welds to weaken the material or fail.
  • Vertical bending being better is an opinion, but most people prefer it.
  • You can remove material from the machine with the clamp attached to test fit, and resume a bend without a mark on the tube!
  • Our fully machined, profile matched clamps don't leave bolt gouges in your tube
  • Our bender has a built in degree wheel, it isn't a separate accessory
  • Dies are much less expensive

Disadvantages:
  • Lack of flexibility of die options (CLR, spacing, etc)
  • Proven over the years (why else would everyone use this design?)

RogueFab 10-19-2012 05:17 PM

Square tube bent on our 1.0 x 4.5 square die. Wall thickness is .095 and .120.

http://i7.photobucket.com/albums/y25...y/P9271680.jpg

lutzke21 10-19-2012 05:27 PM

Video links are not working.

RogueFab 10-23-2012 09:29 AM

Quote:

Originally Posted by lutzke21 (Post 14328650)
Video links are not working.

Thank you. Fixed them.

RogueFab 11-02-2012 10:25 AM

Chris ("Titus") built this awesome rear stinger hinged/removable tire carrier for a TJ using our bender.

This is 1.75 tube bent on our 4.5" CLR die set.

http://i7.photobucket.com/albums/y25...ier20chris.jpg

RogueFab 11-18-2012 06:36 PM

Thanks for the photos and comments everyone. We added a few more photos and quotes to our 'customers' part of the we page, which has now been changed to 'reviews'.

RogueFab 11-25-2012 11:40 PM

It is Cyber Monday! We are offering free shipping on all orders over $1000 and $25 off shipping on all other orders over $100. Discount is given as a refund after purchase. Kick off the online shopping season with new tools from Rogue Fabrication! Continental 48 US states only.

RogueFab 11-29-2012 09:05 AM

We have new revision to the Rogue Alpha, which is shipping right now:

• 90 degree bends on 4.5” CLR dies in ONE ram cycle, no more re-pinning for 90 degree bends, including 4 degrees of over travel for springback!
• Support for dies up to 6.00” CLR
• ~5 Pounds lighter than previous versions
• Same great low price at $595 with any 4.5 CLR die set


We have these in stock and we are shipping most orders within 48 hours! Post here for a quote.

Helldorado Customs 11-29-2012 09:34 AM

Quote:

Originally Posted by RogueFab (Post 14525972)
We have new revision to the Rogue Alpha, which is shipping right now:

• 90 degree bends on 4.5” CLR dies in ONE ram cycle, no more re-pinning for 90 degree bends, including 4 degrees of over travel for springback!
• Support for dies up to 6.00” CLR
• ~5 Pounds lighter than previous versions
• Same great low price at $595 with any 4.5 CLR die set


We have these in stock and we are shipping most orders within 48 hours! Post here for a quote.

One of these to 65109 ?

RogueFab 12-04-2012 05:30 PM

Quote:

Originally Posted by Tomb Raider (Post 14526122)
One of these to 65109 ?

Thanks for the order Scott!:cool:


The time now is 10:39 PM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.