Originally Posted by Jsinclair
Do I need to primer bare metal for this to properly work? what type of cleaner to do recommend I clean the frame with before application? I just fixed my leaky power steering hoses and want to make sure to use the right cleaner so this stuff will stick the best
Sorry I missed this post.
No primer needed. Degrease everything with Zep or Simple Green type water base degreaser and let dry 24 hours
Rough sand (60 grit) any bare clean metal. Medium sand (100 grit) any old paint and make sure to dull glossy areas. Wire brush rusty areas to remove anything loose.
Brush on 2 or 3 thin coats