JeepForum.com

JeepForum.com (http://www.jeepforum.com/forum/)
-   Vendor Display (http://www.jeepforum.com/forum/f43/)
-   -   New and in-stock: WJ shackle tabs for $125 (http://www.jeepforum.com/forum/f43/new-stock-wj-shackle-tabs-125-a-1503677/)

Fawkes 04-03-2013 05:56 PM

New and in-stock: WJ shackle tabs for $125
 
We used to recommend a competitor's product for stand alone shackle tabs... until they changed their design from 7/8" to 1/2" thick in order to compete at a price point with our modular tabs. What you see above is our response; the strongest stand-alone shackle tab on the market for 1999-2004 Grand Cherokees, period.

We've designed these to tuck up as close to the fascia as possible, allowing you to keep your stock approach angle. Each one is constructed with 8.5 of fillet weld and two 9/16 diameter plug welds connecting the 0.75" tab to a 0.25 bracket, which has been bent on a CNC press brake to a radius that maximizes strength. Each tab assembly is bolted to its own 0.25 backing plate via three 1/2" Grade 8 bolts.

What that all translates to is a tow hook replacement with a full one-inch-thickness at the critical joint for off angle pulls, more weld area than a Warn receiver, a clamping area over 18.5 square inches of your uniframe, and a design strength of 35,000#... per tab.

If you're concerned about such things (you don't really need to be with the warranty these carry) we're using an extremely conservative WLL of 3.5 tons, with a safety factor of 5:1.

To install the tabs, you're going to need to widen a few holes in your uniframe. These are a stand alone product that will not work with our modular products. They will work in conjunction with any "hidden"/"stealth" behind-the-bumper winch plate you might want to install.

Phosphated, epoxy primed, and black powdercoated to keep them looking good wther your bouncing them off rocks at Moab, or parking dividers at the mall.

100% Made in the USA.

"If You Can Break It, We'll Replace It" UNLimited Lifetime Warranty.
____________________________

Fawkes 04-07-2013 11:43 AM

Three units left in stock and ready to ship. :)

Fawkes 04-30-2013 05:16 AM

Bump.

Fawkes 05-30-2013 04:55 AM

Down to one pair left. New units won't likely be in stock until August.

Fawkes 07-27-2013 07:32 PM

This newest batch is going to the coaters on Monday. Looks like we'll be shipping within the next two weeks. :D

Redsoxsrt 07-27-2013 09:48 PM

hi are any of the new batch available or are they all called for already? im interested in ordering a set

Fawkes 07-28-2013 07:01 AM

There are roughly 10 sets available for order from this batch.

It's come to my attention that a decent number of folks wanted to wait for these to be in stock before ordering. Unfortunately, as a small shop, no orders=no production. We've gotten lead times down quite a bit (this run will end up at ~3 weeks from the first order), but once we're sold out, we're out until new orders come in. Moral of the story? Order product when you want it, otherwise you may be waiting for someone else to put in an order before we run a batch again.

Just something to keep in mind for those who might be on the fence about putting in an order for our product. :)

Fawkes 08-06-2013 04:26 PM

Back in stock and shipping!

Outstanding orders will receive tracking numbers before the day is out. :)

Fawkes 08-10-2013 06:16 PM

All outstanding orders have been delivered.

I'll be out of town from 8/15-9/3, so if you want a set delivered before mid-September, you should order this week.

Fawkes 09-03-2013 09:35 AM

Outstanding orders should have tracking numbers in their email, and will be dropped off at the post office when I pick up my held mail this afternoon.

Deliveries all look like they will happen before the end of the week. Thanks for your patience folks!

I still have three sets available before the wait for the next batch.

EDIT: Now out of stock. USPS managed to destroy three of the four packages I sent out last week. :brickwall

Fawkes 10-02-2013 07:01 PM

Steel order *IN* and being processed. We will have our full product lineup available and in stock ready for shipping (hopefully) sometime around the first week in November.

I can't guarantee how long everything will stay in stock, and this will likely be the last run for 2013. 2014 will probably see a mild price increase, so get your order in soon!

Fawkes 10-08-2013 03:24 PM

bump.

Fawkes 11-27-2013 07:14 PM

Back in stock and shipping!

Six sets of Gen2, and three sets of the discounted Gen1/2 mismatched shackle tabs are ready for shipping on Monday, 12/2.

Happy Thanksgiving!

Fawkes 12-01-2013 09:00 PM

Bump

Fawkes 12-12-2013 09:58 PM

Two of the standard sets left, all three of the discounted cosmetic seconds are up for grabs.

Also, apologies for any delays in getting these out this week. I was on the road at the PRI show in Indianapolis. :)


The time now is 04:48 AM.

Powered by vBulletin Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.