New solution to JK license plate relocation - JeepForum.com
Reply
 
LinkBack Thread Tools
post #1 of 17 Old 05-16-2013, 03:52 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
New solution to JK license plate relocation

Hello Fellow Jeepers,
We are Full Metal Fabworks LLC, a new vendor on the site. We know a lot of you frequent several forums, so you may recognize us from over on JKO. We have several products in the development process, but in the mean time we wanted to release a few of the products we offer to a new crowd and get our name out there a little more. Enough with the introduction, and on to the parts.

One of the first parts we would like to bring to market is The Solution Plate license plate relocation system. It’s no secret that the JK’s license plate is mounted in a vulnerable location and is prone to damage on the trails. For those looking to clean up the back of their JKs and ditch the extra weight of a tail gate mounted spare, the tire carrier mount provides a great spot to relocate your license plate.

The solution plate is laser cut from .090 aluminum and formed using a custom die. This forming process not only greatly increases the strength and rigidity of the plate, it also allows us to address a couple issues left untouched by existing license plate relocation systems in a single streamlined part.
The plate is dimpled out 7/8” to allow both horizontal and vertical vents to remain fully functional WITHOUT REMOVING THE VENT. This is important because it allows the cab to remain sealed from dust and water just as Chrysler designed it from the factory. A row of four laser cut holes along the bottom of the plate allow the vent to "breath".

It ships powder coated in a textured satin black finish,with (4) 1/4-20x3/8" stainless steel button head cap screws and (4) 1/4-20 top lock nuts for mounting the license plate, 3 plugs for the tailgate, and the solution plate itself mounts using the existing factory spare tire carrier mounting bolts and holes. We also are a dealer for ORO and sell their LiteDOT LED license plate light and 3rd brake light that really helps clean up the back of our JKs.

Pricing:
Solution Plate and hardware: $60
ORO license plate light and 3rd brake light: $40
Optional CB mount #1 powder coated textured satin black to match the solution plate:$12 when purchased with Solution Plate
Optional CB mount #2 powder coated textured satin black to match the solution plate: also $12 when purchased with the Solution Plate
License Plate Delete Plug: $18 when purchased with the Solution Plate ( solution plate comes with plastic plugs for the tailgate)
To Order Call: 909-792-9777 or shoot us a pm with a complete shipping address for shipping quotes.

optional CB mount #1:


optional CB mount #2:


optional License Plate Delete Plug:



Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME

Last edited by FullMetalFabworks; 08-27-2013 at 12:06 PM.
FullMetalFabworks is offline  
Sponsored Links
Advertisement
 
post #2 of 17 Old 06-12-2013, 05:37 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Thanks for the orders. We still have a lot of these in stock and ready to ship.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #3 of 17 Old 06-28-2013, 06:32 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Thanks for the orders, and thanks to Jim V. for this pic of his Solution Plate that he integrated his LockPick backup camera into.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #4 of 17 Old 07-12-2013, 02:22 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Bump, Still in stock and ready to ship. Shoot us a pm for a shipping quote.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #5 of 17 Old 07-23-2013, 03:17 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Ttt

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #6 of 17 Old 08-27-2013, 12:07 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
bump,
We added another option for a CB antenna mount that works well with the Solution Plate. The idea came from a member and it puts the antenna far enough towards the outside of the Jeep that its out of the way of the spare tire but far enough inside that it isn't constantly getting thrashed by trail obstacles. These are also $12 when ordered in combination with a Solution Plate. Details have been added to the original post.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #7 of 17 Old 09-12-2013, 01:06 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
TTT,
Here is a customer submitted pic of her solution plate color matched to her JK.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #8 of 17 Old 09-24-2013, 01:33 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
We've had a lot of requests for the plugs to fill the holes in the tailgate and the factory license plate mount. We added an option for the license plate delete plug in the original post and from now on kits will come standard with the 3 plugs for the tail gate. If you have already purchased a kit previously and have not yet found a solution for the tail gate plugs we will make this retro-active so just give us a call and we will send the 3 plugs your way.
Thanks,
Full Metal Fabworks

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #9 of 17 Old 12-05-2013, 12:49 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Another customer pic using our Solution Plate, Complete plug kit, and an ORO tag/3rd brake light. Thanks for the pic Tom. We have these in stock and ready to ship.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #10 of 17 Old 01-05-2014, 11:29 AM
ivan44
Registered User
 
Join Date: Oct 2011
Location: miami
Posts: 2
Does led light kit include the 6' extension?
ivan44 is offline  
post #11 of 17 Old 01-06-2014, 11:43 AM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Quote:
Originally Posted by ivan44 View Post
Does led light kit include the 6' extension?
Ivan,
It is actually a 7' extension but yes the ORO tag/3rd brake light does come with the extension.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #12 of 17 Old 01-08-2014, 11:48 AM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Thanks to Jason H. for this pic of his Dune JK running our complete LP relocation kit. Got all parts in stock let us know if we can get one headed your way.
909-792-9777

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #13 of 17 Old 04-07-2014, 07:30 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Bump,
Just picked up a fresh batch of these from the powder coaters, let us know if we can get a shipping quote for you on one of these. 909-792-9777

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
post #14 of 17 Old 04-14-2014, 05:01 PM
tommyboyOSU
Registered User
2009 JK Wrangler 
 
Join Date: Aug 2010
Location: Stillwater OK
Posts: 11
Looks clean, good job Full Metal Fabworks
tommyboyOSU is offline  
post #15 of 17 Old 04-22-2014, 05:12 PM Thread Starter
FullMetalFabworks
Registered User
2012 JK Wrangler 
 
Join Date: May 2013
Location: Redlands
Posts: 48
Quote:
Originally Posted by tommyboyOSU View Post
Looks clean, good job Full Metal Fabworks
Thank you sir.

Website:www.FullMetalFabworks.com
Follow us on Facebook: here
909-792-9777
Andrew@fullmetalfabworks.com
DEALER INQUIRIES WELCOME
FullMetalFabworks is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome