This has been a project I have wanted to take on for a while now and this combined with a couple other threads here are getting me excited about the idea. I have a couple questions....
After the price increase will you continue the JeepForum promo?
Your webpage gallery shows pictures of the YJ and it looks like you didn't remove the roll cage or the seat belts, Based off of yours and other peoples experience would you recomend taking the time to remove it all?
How long is the average time it takes to roll the inside of a YJ? Found my answer in earlier post sounds like roughly an hour
Correct, we did not remove belts or cage in that white YJ
I also did a 98 TJ where I did remove the belts but not the cage
It is a PITA to get behind the bars to coat in the front seating area. If I did another, as long as I had a good impact wrench and quality torx bits I would remove the cage but not everyone has the tools so that's usually the deciding factor.
I'm getting ready to order for my YJ Monstalining project.
Going to spray the tub inside, the whole outside(tub/hood/fenders/grill) as well as two half doors, roll bar, and windshield frame in Dark Burnt Orange.
Will I need 3 full gallons, or will 2 gallons and a quart do?
With Dark Burnt Orange how much will i need to thin it for spraying?
Should it be thinned with MEK or reducer?
I still have lots of sanding, some assembly and CS before the Monstaliner goes on.
I bought some torx bits from lowes and removed everything from the tube of my LJ, I even redid the factory sealant job that globbed on! It wasn't all that bad! But I am perfectionist when it comes to certain things. I will do the exact something on my Lj Rubi but I think I am going to spray this time.