Jeep Enthusiast Forums banner

Introducing MONSTALINER� UV Permanent DIY Roll On Bed Liner

2M views 14K replies 1K participants last post by  HandOverFist 
#1 ·
Introducing MONSTALINER™ UV Permanent DIY Roll On Bed Liner

Hi All,

We are a new advertiser on jeepforum.com and I just want to introduce myself, our company and a very interesting new product.

My name is Eric and I have 25+ years experience in coatings manufacturing.
Our company Magnet Paints, is focused on industrial maintenance and commercial fleet refinish coatings,
epoxy and urethane concrete floor coatings and automotive restoration paints.

We are also the manufacturers of Chassis Saver™ Rust Preventive Truck & Auto Underbody Coating.
Chassis Saver is a high performance alternate to POR-15 at 45% lower cost.


For the past 5 years, our lab has been developing and fine tuning a roll on bed liner product.
The product has evolved through 3 generations of testing, development and field trials and has just been
commercialized and is available for sale.

I have personally been involved with installations on more than 20 vehicles in the last 4 years in which
my feedback and experience alone was the determining factor that the product was complete and ready for release.

Monstaliner started as a pet project. One of our employees had used a widely popular DIY bed liner on his
personal truck and was not so pleased with the outcome. He came into work one day with a mission and
for almost a year, he kept badgering the chemists in our lab to develop a better product.

One day after getting tired of listening to this guy rant, we sat down and mapped out what a
new generation do-it-yourself bed liner would have to offer to be successful. A first, we just toyed with the
project but we knew that a much better product was possible compared to those already on the market.

So here we are, very proud to present:

MONSTALINER™ High Performance DIY Roll On Bed Liner

I don't want to write a book here so I will post the web site link for all who are curious to check this out on their own time.

As an introduction special and for the rest of this month at least,
we are offering free shipping on anything sold on the web site.

Just use Promo Code "FSBL-1" when ordering either online or by phone.


Everyone, anyone... please feel free to ask any questions. I am always available to help.

Best Regards
magnetman
Monstaliner do-it-yourself roll-on truck bed liner

PS: We are looking for dealers in markets involving Jeep, Truck, 4x4 and Off-Roading.
If anyone with a legit business either online or offline has interest, just get in touch and we can
work with you to make something happen.


Additional links on our main web site
Magnet Paints Manufacturers High Performance Specialty Coatings
Paint Over Rust to Stop Rust Permanently With Chassis Saver Truck & Auto Underbody Coating
 
See less See more
#3,081 ·
I always love companies who take the time to step away from the legal precise jargon a little and make the intentions of the customer known up front. When I see something like "We know you probably won't read everything so read this instead," I laugh and usually end up reading everything more carefully (because who knows... there might be more funnies in there).
 
#3,083 ·
Oh, how about some little icons of goggles, gloves, etc?

I always love companies who take the time to step away from the legal precise jargon a little and make the intentions of the customer known up front. When I see something like "We know you probably won't read everything so read this instead," I laugh and usually end up reading everything more carefully (because who knows... there might be more funnies in there).
If you can't read directions, don't call with problems!

If you didn't read the directions and you have a problem send email to : info@dumb***.com or info@duhwadoidonow.com
 
#3,085 ·
Is it bad that it started snowing while I was applying the first coat this morning? That's Buffalo for you... I finished both coats, and the gallon covered, perfectly, the entire tub as well as the factory roll bars/cage. I'm very happy.
 
#3,086 ·
Get pics when you can. I go to school in Binghamton, so I know exactly what you are talking about.
 
#3,088 ·
How did you open the legs wide enough to get your head in there to see?

Stolen
 
#3,091 ·
Awesome, Thanks for the info. Will be nice to knock them both out at same time. Glad I have enough. Timing should work out great for the colored stuff for the Jeep-top will be off all summer so no worry about the fumes.

On the statement/directions above, looks very easy to read and understand. Good thinking making it fit on the lid-I rarely read the side labels, but always read the top as it takes a few seconds to open the lid anyway. Course, no matter how hard you try, you can never make it 100% idiot proof. That looks about as close as you can get though. Nice work.

Best of Luck,

Mike
 
#3,097 ·
Awesome, Thanks for the info. Will be nice to knock them both out at same time. Glad I have enough. Timing should work out great for the colored stuff for the Jeep-top will be off all summer so no worry about the fumes.

On the statement/directions above, looks very easy to read and understand. Good thinking making it fit on the lid-I rarely read the side labels, but always read the top as it takes a few seconds to open the lid anyway. Course, no matter how hard you try, you can never make it 100% idiot proof. That looks about as close as you can get though. Nice work.

Best of Luck,

Mike
Wait till you see the diagrams going into the revised install guide :brickwall
 
#3,092 ·
GenPowell, note, I stole that from Magnet when he tried to use it on me about 1 year ago and I totally missed the funnies there.
 
#3,094 ·
Trying to read through all this; maybe it's been answered and I've missed it. Can Monstaliner be used on factory flares/bumper caps (specifically the 97+ XJ plastic that oxidizes so badly)? I've got to do something about surface rust in the cargo area, and thought I'd bedline afterwards, and maybe the bumpers and flares as well if I can find something that works well on all three. I think CS + liner would be fine in the back and on the bumpers, but I'm really curious about how it would fare on the plastics.
 
#3,096 ·
NO!!!! DO NOT USE SOLVENT.

Magnet, you have the PDF, handle this :laugh:
 
#3,103 ·
I was wondering, would one gallon work for the interior of a 2dr JK? or would you recommend 2 gallons?
 
#3,104 ·
Feel free to correct me if I'm wrong... I believe one gallon will do the interior of all 2-door Jeeps.
 
#3,105 ·
Domovoi, 1 gallon and go to town :thumbsup:
 
#3,113 ·
i go away for 2 days and i come back to a monsta emoticon!!! :monsta: if i was a paying member where i could put it in my sig i would fo sure! note to self... get a paid membership. lol
 
#3,114 ·
Nope, we can't get emoticons in our sigs.... not even lifers.
 
#3,116 ·
Looks good. Who knows.... maybe I might get to see some magic tomorrow. My dad and I might be headed down in the morning.... sound good? Call in the morning (would be after 9)?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top