HIDprojectors XTRA-LIGHT DIY Bi-Xenon kit - starting at $255 - Page 4 - JeepForum.com

Reply
 
LinkBack Thread Tools
post #46 of 75 Old 09-04-2012, 08:05 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Quote:
Originally Posted by BamaJeepman21 View Post
Dang. So I was trying to compile a list of what I needed since I can't reuse my IPF housings and came across this.




What do I not need since I have a TJ? I would like for you to do the assembly since I really would hate to screw up $250 lights. I wouldn't need you to paint them, I could do that myself. I would need new lenses right?

I love the green angle eyes. Do those only go on the inside ring and not the outside? I wish you could have some green LED rings. Those would be sweet. Sorry for all the questions. Lights, well electronics in general, are confusing to me.
You wouldn't need the can bus cancelers (saves you $20).
You'd need an H4 harness in place of the H13 (no cost difference and I have these in stock as well).
You'd need the basic kit with lenses as well.

I'm a bit confused on your request though - you state that you'd like me to assemble them but you also state that you want to do the painting yourself. Can you clarify?

If easier - feel free to email me at HIDprojectors@gmail.com

HIDprojectors is offline  
Sponsored Links
Advertisement
 
post #47 of 75 Old 09-04-2012, 08:08 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Here's an ordering guide to help when requesting pricing or placing an order:

Step 1) Decide if you want to build these lights yourself or if you want me to build them for you.
IF YOU WANT THE DIY KIT ($255), send me the following information:
a) Bulb color (4300k or 6000k)
b) Ballast choice (standard 35W Xentec DC ballast or the upgraded 35W AC XTRA-LIGHT ballasts, a $65 upgrade)
c) Shroud choice (if different than the stock Mini Gatling Gun Shroud). Shroud options can be viewed above.

*****Thats it for the DIY guys*****

If you'd rather I build these for you, move to step 2...

Step 2) Decide whether or not you want new lenses or if you'd like to reuse your current stock lenses.
- Either option requires a labor assembly charge of $100
- New lenses are a $100 charge
- Reusing your stock lenses requires that you mail me your lenses

Step 3) Choose your options:
a) Bulb color (4300k or 6000k)
b) Ballast choice (standard 35W Xentec DC ballast or the upgraded 35W AC XTRA-LIGHT ballasts, a $65 upgrade)
c) Shroud choice (if different than the stock Mini Gatling Gun Shroud). Shroud options can be viewed above.
d) Paint choice ($50 option). You can paint the housing and or the shrouds - contact me for other custom requests.

Thats it! Email me your choices to HIDprojectors@gmail.com and I'll help you through the rest of the process.

Payment Options: I accept the following:
- PayPal (I'll send you an invoice)
- Check or Money order (must wait for it to clear)
- Credit Card or Debit Card over the phone (I'll email you a receipt)
- Cash in person.
HIDprojectors is offline  
post #48 of 75 Old 09-04-2012, 09:17 AM
BamaJeepman21
Registered User
1998 TJ Wrangler 
 
Join Date: Feb 2011
Location: Tuscaloosa
Posts: 4,210
Quote:
Originally Posted by HIDprojectors View Post
Here's an ordering guide to help when requesting pricing or placing an order:

Step 1) Decide if you want to build these lights yourself or if you want me to build them for you.
IF YOU WANT THE DIY KIT ($255), send me the following information:
a) Bulb color (4300k or 6000k)
b) Ballast choice (standard 35W Xentec DC ballast or the upgraded 35W AC XTRA-LIGHT ballasts, a $65 upgrade)
c) Shroud choice (if different than the stock Mini Gatling Gun Shroud). Shroud options can be viewed above.

*****Thats it for the DIY guys*****

If you'd rather I build these for you, move to step 2...

Step 2) Decide whether or not you want new lenses or if you'd like to reuse your current stock lenses.
- Either option requires a labor assembly charge of $100
- New lenses are a $100 charge
- Reusing your stock lenses requires that you mail me your lenses

Step 3) Choose your options:
a) Bulb color (4300k or 6000k)
b) Ballast choice (standard 35W Xentec DC ballast or the upgraded 35W AC XTRA-LIGHT ballasts, a $65 upgrade)
c) Shroud choice (if different than the stock Mini Gatling Gun Shroud). Shroud options can be viewed above.
d) Paint choice ($50 option). You can paint the housing and or the shrouds - contact me for other custom requests.

Thats it! Email me your choices to HIDprojectors@gmail.com and I'll help you through the rest of the process.

Payment Options: I accept the following:
- PayPal (I'll send you an invoice)
- Check or Money order (must wait for it to clear)
- Credit Card or Debit Card over the phone (I'll email you a receipt)
- Cash in person.
This makes it much easier to see what I need.

1. Kit

New lenses
6000k
AC Xtra light ballasts
Regular Gatlin Gun shroud with green angel eyes
white or green LED ring
paint
assembly

I think that should cover it. I'm not sure if I'm capable of putting together all this. I know in your first post you said it was pretty easy. I think these lights will looks great. Do you think you'll ever stock green LED lights?

-Jack
BamaJeepman21 is offline  
post #49 of 75 Old 09-04-2012, 10:45 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Quote:
Originally Posted by BamaJeepman21 View Post
This makes it much easier to see what I need.

1. Kit

New lenses
6000k
AC Xtra light ballasts
Regular Gatlin Gun shroud with green angel eyes
white or green LED ring
paint
assembly

I think that should cover it. I'm not sure if I'm capable of putting together all this. I know in your first post you said it was pretty easy. I think these lights will looks great. Do you think you'll ever stock green LED lights?
You're pretty close - here's what your set would cost:
$235 for the Projectors, H4 harness for your TJ, 6000k bulbs (less $20 for no can bus)
$65 for the XTRA-LIGHT 35W ballasts
$75 for the Angel Eye Shroud with green angel eyes (I dont offer the Gatling Gun Shroud with angel eyes, there's no good place to mount the CCFL ring).
$50 for the White LED Rings (if you want Green LED rings, you can buy them from Oracle and I can install them for you for free, I dont stock these).
$50 for paint (need to know what color and what you'd like painted)
$100 for new lenses
$100 for labor

Total: $675

The green angel eyes take about a week to get in. Assembly to finish shortly thereafter.
HIDprojectors is offline  
post #50 of 75 Old 09-15-2012, 05:29 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Clubman shrouds installed

Here's a picture of a customer's lights built with the clubman shrouds and white angel eyes.



HIDprojectors is offline  
post #51 of 75 Old 09-22-2012, 05:37 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
A couple of sets just completed this week:

Satin black Angel Eye Shrouds with satin black housings, white CCFL Angel Eyes and Oracle Color Shift LEDs (customer provided).



Smoke Shrouds with chrome housings and my white LED rings:



HIDprojectors is offline  
post #52 of 75 Old 09-26-2012, 05:24 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
This customer chose a very unique setup.

Silver MONSTER GATLING GUN Shrouds with one angel eye in each and a satin black housing. We painted the vent ring red (this is the ring that normally holds the 2nd angel eye).

The results speak for themselves!





HIDprojectors is offline  
post #53 of 75 Old 10-01-2012, 05:20 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Satin Black housings with satin black MONSTER GATLING GUN shroud and white angel eyes.



This pair is headed to Europe!
HIDprojectors is offline  
post #54 of 75 Old 10-04-2012, 06:07 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
XTRA-LIGHT H1 Projectors: $255
Chrome Housings
Chrome Mini Gatling Gun Shrouds
H13 Harness with can bus cancelers
6000k bulbs
New Lenses: $100
White LED Rings: $50
35W XTRA-LIGHT AC Ballast upgrade: $65
Labor: $100

Total: $570



HIDprojectors is offline  
post #55 of 75 Old 10-08-2012, 05:25 PM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Added some video to these sets as well as some pics.

Silver housings, Clubman Shrouds with white angel eyes and red LED rings:








Satin black housings and satin black angel eyes with white LED rings:





HIDprojectors is offline  
post #56 of 75 Old 10-10-2012, 08:02 PM
Gabe
Registered User
 
Gabe's Avatar
1998 TJ Wrangler 
 
Join Date: Jun 2006
Posts: 2,693
Does the DIY kit include H4 housings for us TJ owners that have the stock sealed beam lights?

What work is required to fit the projector and shroud into the H4 conversion housing?

Quote:
Originally Posted by Rubi22
Holy ****, did someone log onto Mean Fish's account and say something thoughtful?
Gabe is offline  
post #57 of 75 Old 10-11-2012, 10:55 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Quote:
Originally Posted by Gabe View Post
Does the DIY kit include H4 housings for us TJ owners that have the stock sealed beam lights?

What work is required to fit the projector and shroud into the H4 conversion housing?
The DIY kit would include an H4 harness if you wish to install it on your TJ but you'll also need a pair of JK lenses to complete the build. The projectors protrude past the depth of a normal housing, requiring the domed lens of the JK to allow for everything to get assembled together.

JK replacement headlights (which you'll need to dissasemble to use the lenses) are $100 a pair - I sell them or you can source them from your favorite vendor.
HIDprojectors is offline  
post #58 of 75 Old 10-19-2012, 07:06 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
HIDprojectors in Romania!







HIDprojectors is offline  
post #59 of 75 Old 10-22-2012, 08:35 AM Thread Starter
HIDprojectors
Registered User
 
Join Date: May 2012
Location: Tulsa
Posts: 102
Headed off to Colorado.

Satin Black Housings and Satin Black mini gatling gun shrouds with a white LED ring.



HIDprojectors is offline  
post #60 of 75 Old 10-22-2012, 01:05 PM
bottlerocket91
Registered User
2000 TJ Wrangler 
 
Join Date: Oct 2010
Location: Wichita Falls
Posts: 918
Any pics of these on a TJ?
bottlerocket91 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Jeep Forums Replies Last Post
xtra money. Rebuild RE arms or replace with Currie freckelman TJ Wrangler Technical Forum 0 12-16-2011 03:10 PM
Xenon flat flare side marker light wiring TheTexasHammer TJ Wrangler Technical Forum 3 12-03-2010 09:08 AM
Cold Starting Check Engine light woody59 YJ Wrangler Technical Forum 0 02-23-2008 07:37 PM
Lucas Xtra heavy grease Nonya TJ Wrangler Technical Forum 6 02-06-2008 11:11 PM
Airbag light in dash when starting mrmojorisin TJ Wrangler Technical Forum 16 09-04-2003 07:30 AM

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome