Harbor Freight Tubing Roller Dies (19) Sizes Available @ Swag Off Road
Swag Off Road is now selling the following die sizes listed below for the Harbor Freight tubing roller.
With these additional dies you will now have at your finger tips.
1.00" Upgraded Drive Roller Only
1.50" Upgraded Drive Roller Only
2.00" Round HF
Universal Flat Bar Edge Roller
.50" Pipe Die
.75" Pipe Die
1.00" Pipe Die
1.25" Pipe Die
1.50" Pipe Die
These dies are CNC machined out of bar stock 1018 steel for precise fit.
Each die set Includes 1 Drive Roller, 2 Driven Rollers, 1 Replacement Drive Axle made out of 4130 chromoly & 8 Set Screws.
Each drive roller has 8 set screws for increased durability not 3 like the HF rollers.
A new replacement drive axle is included and has 8 machined flats for the drive roller and 4 machined flats for the crank wheel.
Take a look at the Youtube video at
Swag Off Road Tubing Roller Dies
We keep rolling rolling rolling.
In stock ready to rock.
I wanted to bump this up to the top and let you know that we just released two additional round tube die sizes, 0.50" and 0.875" dies.
In addition I have a customer who built this door using the .75" Square, 1.50" Square and Universal flat bar dies. :smokin:
We now sell 16 different sized dies for the Harbor Freight tubing roller.
I am now selling some weld on wings for the HF tubing roller. These wings are laser cut out of high strength A-572 Gr50 1/4" thick steel . They extend the total width of the bottom rollers 6" for the first hole and 12" for the second hole. These plates reduce the total effort required in rolling tube ~50%.
If you have used this tubing roller previously then you can understand how the extended wings can be a real time saver.
These plates ship in a flat rate USPS box.
HF tubing roller replacement roller bearings.
Are you constantly changing die sizes from project to project and tired of swapping the (4) roller bearings on the outer driven rollers from die set to die set? We now offer factory direct replacements, a set of (4) for just $12.00.
Check out this Youtube video. We have some of the best customers in the industry.
love the door. very cool products.
Let us know if you have any questions along the way.
We are currently up to 46 different sizes of dies available and all of them are in stock.
Thanks again for the orders.
Thanks again for the orders. We now have ~46 different sizes of dies for the SWAG and or HF tubing roller. We have every dies size in stock. Please let us know if you have any questions and or would like to add another size to the line up.
Shown below is the Universal Small Round Die Set.
If you have any questions for us let us know. As it currently stands we have 43 different die sizes in stock and over 800 dies on the shelf.
If you are running late on a project we can also ship the die sizes out next day air.
Thanks for the orders.
Feeding trough anyone?
|The time now is 05:26 AM.|
Powered by vBulletin Version 3.8.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.