Hood Louver Set, 5pc BLACK
This is the Gen-Right Off Road 5 piece hood louver set for a Jeep TJ/LJ or YJ.
This configuration offers maximum cooling for your engine compartment!
The louvers can be mounted in many different positions on the hood and (this part number) is sold in 5 piece set with a black powder coated finish.
This 5pc kit is: (1) Front louver with louvers in traditional direction, (2) short back louvers and (2) long back louvers.
Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.
Dimensions: Front louver 22" x 3-3/4", Long louvers 15-1/2" x 4", Short louvers 7-3/4" x 8".
This is the ALUMINUM Tube Front fender flares from GenRight Off Road for the Jeep JK.
These tube fenders are perfect for rock crawling through the Boulders or Trees on your favorite trail.
Want to go with bigger tires? We have also opened the wheel well to better clear those new bigger tires you want to buy too.
Made of lightweight & durable 6061 Aluminum alloy.
Bolts on in same location as stock flare.
4" wide flare (same as stock).
Bigger wheel opening (up and rearward) to prevent tire rubbing.
1/8" thick laser cut and CNC bent plate and tubes will hold up out on the trail.
Built from rugged 1-1/2" diameter x .188" wall tubing.
TIG Welded in a precision jig to assure a good fit.
Includes new hardware (some stock hardware is reused).
Retains your stock inner fender well.
Includes detailed installation instructions.
100% made in USA!
Why pay more from a competitor? We are the company that pioneered trail tough aluminum tube fenders!
Fenders are sold in pairs.
LED Side marker light kits are also available.
Installation requires minor drilling of the factory mounting locations.
This is the newest ALUMINUM version (G3) Tube Front Hi-Fender from GenRight Off Road, with a 4" flare for a Jeep TJ or LJ. We have incorporated a removable side panel into this new fender that not only makes it look unique but helps make installation easier and provide a great way to remove more under hood heat.
The GenRight Hi-Fender models allow you to run larger tires without lifting the vehicle.
Based on our trail proven Boulder Series tube fenders, this model has a 4" flare built on it to reduce mud and water from being flung around by those big off road tires (also helps to be street legal).
This is a great way to repair/replace trail damaged fenders or upgrade/update your Jeeps front fenders with better trail clearance.
Super lightweight Aluminum Alloy version, only 8lbs!
Hi-Fender model opens the wheel opening over 3" up and back.
Innovative removable side panel (easy access to engine compartment)
Larger wheel opening to better clear bigger tires
Built from durable 1-1/2" diameter x .188" wall tubing
Easy to install, retains & reuses your stock inner fender well (aluminum inner fender wells are also available). (TFF2HIF)
Now includes our perforated (shown) side panels(TFF5506) to remove more unwanted engine heat
Standard -fender (TFF2710)
Also available in a 0" flare(TFF2630) and 6" flare (TFF2830) version
100% Made in the USA
Sold Raw unpainted
We have Stealth side and front marker/signal light kits (LED1004)
Mounting Hi-Fenders is a BIG job and requires cutting the hood or buying an AEV Hi-Line hood.
To reuse the factory inner fender well you must purchase our Inner Fender Relocation kit (TFF-2500) which is sold separately.
We recommend fully fitting the fenders to your Jeep before painting or power coating
Call 706-207-4140 to order!
This is the GenRight Off Road 4 light Stealth Side Marker Light Kit. It includes the hard to find super bright amber colored LED's. It can be used as a front blinker & running light.
GenRight has packaged this Stealth L.E.D. kit specifically for use with our tube front fenders (although it will work with other brand tube fenders too).
Small lights are super clean on Jeep.
(2) Rectangular shaped LED's (for side markers).
(2) Round Shaped LED's fit into any 3/4" diameter hole.
Super bright AMBER color LED's in each lamp.
Aluminum bracket is designed to fit on the bottom of any hood latch bolt.
Sold as a set.
Includes all necessary mounting hardware.
8" long leads.
Super low amperage draw.
Basic installation instructions are included.
Polarity matters on LED bulbs, you must match positive to positive and negative to negative.
Installing this kit will require cutting and splicing into the factory wiring harness.
Installation of this kit onto GenRight Tube fenders does NOT require drilling (we use existing holes).
A modified flasher unit or “electronic” flasher will be required to make LED lights flash.